Packing machine, buy Flat Die Wood Pellet Mill on China Suppliers Mobile

Product Details

Specifications

1.Flat die wood pellet mill
2.Capacity:1000-1500kg/h
3.Diameter:4.5-12mm
4.Length:2-10mm
5.CE certificate

Detailed introduction

Range of application

1, this machine is a kind of rotary drum swing function, through the wire sieve can be wet powder materials research into grain, can be widely used for crushing has become pieces and become a ready-made grain with.

2, the chemicals used in wet joint powder inquiry into grain, after drying for pressing tablet, and shattered in the storage period and agglomerating or in chemical processing process agglomerate pieces, in the food industry used for processing candy and sugar mixture and malt milk product, such as in other industries such as ceramic, plastic mixture become forming granule.

3, it does not apply to half solid, liquid, paste or the use of wear.

Basic characteristics

1, machine strong, simple operation, stable running, a large volume of the bucket. Rotary drum with stainless steel make, ensure the quality of the material processing clean and does not change color.

2, mesh sieve mesh number of how many, should be based on particle size requirements, the user should bring along their own squash, its device with two pieces of steel clip, loading and simple, tight pine by fine teeth wheel shored up, can proper adjustment.
Structure that

1, the main body: the body is a independent rectangular cylinder, the plant closed bearing and powder bucket connection, powder bucket to the outside, under which a V chassis, the ground wide and flat, so must be under installation, can be arbitrary placed indoor use.

2, particle manufacturing device: rotary drum lie in buy powder under the bucket, and a bearing support, it through the rack drive, reversing rotary, face front bearing cover for activity type, put down, as long as the screw off a wing nut, bearing cover and the rotating drum, can take place at both ends of the cylinder system have convex FangHuan, embedded bearing indoor, so don't make pollution into the FenZi and not binding plug.

3, reducer, the worm gear transmission, so the ratio to, can store oil, guarantee the gear lubrication good and no noise, box on the glass can be observed, observe the running situation and oil reserve, worm gear, the end with eccentric shaft, drive rack for reciprocating motion.

4, screen pinch: device in the rotary drum, the two sides of the steel pipe manufacturing, intermediate having a long slot, screen at both ends of the embedded groove, rotational flower shape wheel will screen wrapped in rotating cylinder cylindrical, hand wheel were shored up gear, elastic can be adjusted.

5, electric frame: a and screw bolt prison, motor is packed in iron, when rotating screw bolt, motor is up and down, for regulating belt.
Role that
1, method of use: start the machine, the mixture into a bucket, the rotary drum in the swing of the role, through the wire mesh screen granulated, fall into the receptacle, such as crushing pieces should be gradually join, unfavorable and full, in order to avoid too much pressure, and make the screen vulnerable.

2, note: powder bucket inside such as powder not stagnation, must not use a hand to shovel, so as to avoid the injury accident, the application of bamboo hand shovel or stop work.

3, speed choice: due to the use of the property of raw materials is differ, so how to speed to choose, can generally be according to the viscosity of the material and the degree of dry and wet to choose. Various faster, wet goods should be slow, but its scope cannot be unified regulation, should by user according to the actual operation situation and decide.
Maintenance instructions
1, regular check parts, monthly, check the worm gear, worm, lubrication piece of a bolt, bearing movable part can turn agile and wear situation, found that the defect should be repaired in time may not be forced to use.

2, the machine must be kept in dry clean indoor use, not in the atmosphere contains acids and other body corrosive gas of circulation use of the place.

3, machine after using or stop when, should remove rotating drum cleaning and brush cleaning bucket inside residual FenZi, and then reassembled, prepare for next time use.

4, when the roller in the work before and after happened there still, please adjusting front bearing on he M10 screw to the appropriate position. If the gear shaft happen there still, please adjusting bearing rack behind M10 screw to the appropriate position, adjust the clearance to the bearing noise will not occur, the hand turn pulley, elastic appropriate advisable, too tight or too loose all can make this happen damage may be.

5, such as stops for a long time, must wipe clean body machine, part of the smooth surface coated with antirust oil, cloth top cover good.

Type	Output(kg/h)	Power(kw)	Pellet Size	Weight	Size(mm)
JK200	30-80	11-4	Φ4-6mm	0.2t	1300500850
JK250	80-200	15-4	Φ4-6mm	0.5t	14006001000
JK300	100-300	30-4	Φ4-8mm	0.76t	18606701600
JK2-350A	300-600	37-4	Φ4.5-10mm	2.2t	19008501750
JK2-450A	500-800	55	Φ4.5-10mm	4.3t	230011001900
JK3-550A	1000-1500	90-6	Φ4.5-12mm	5.5t	235010002050
JK2-800	1500-2500	130-160	Φ4.5-12mm	6.8t	320012352700
JK3-1200	3000-5000	280-320	Φ4.5-15mm	19t	380017004200

Contact us