Features
1.hot sale
2.ligh wight
nvenient use
Parameter
Mode | T-333/MH-32A |
weight | 3.7kg |
strap width | 13. 16. 19 mm |
strap thickness | 0.4 - 0.6 mm |
seal notch way | buckle free |
joint strength | about80% |
Maintenance for Steel Strapping Tool
1,Fill the lubricator with 22# steam turbine
Oil to keep a quantity of lubricating oil in the motor and the cylinder when the
Motor is running.The oil must drop through the lubricator at a rate of 40 drops to 60 drops per minute,if some drops can be filled into the tool directly before daily
Operation,the operation will be successful.
2,Adjusting the air pressure within the range of 0.4—0.6Mpa to obtain enough air pressure,otherwise, the bundling quality will be affected.
3, Clean the lubricator and the filter with Kerosene at least one time in three month during operation.Drain the water from the filiter daily.
Strapping example
Poducts picture
Workshop