Specifications

1. reclaimed rubber making machine
2. fully automatic
3. power saving
4. long life time
5. environment friendly

Used tyre recycling production line/Reclaiming rubber machine

 

It is to make high quality reclaimed rubber with used tyres in a power saving, continuous as well as enviroment-friendly way. The reclaimed rubber from the prodcution line can be used for makin of tyres, rubber shoes, layer for cables. rubber tiles, etc.

 

 

Here are the main euipments for making reclaimed rubber.

 

 

I. Electromagnetic Induction Heating Devulcanized System

 

 

Model:	CRR-15	Model: CRR-30
Capacity	14-17Ton/Day	28-34 Ton/Day
Total Rated Power	100KW (Consume 60-70KW)	200KW (Consume 120-140KW)
Dimension(m)	15.6X2.5X4.5	15.6X5X4.5
Weight (Ton)	17	34

 

 

 

Main Part Lists:

 

1. Agitation System

 

2. Auto Feeding System

 

3. Main Reactor with electromagnetic induction heating System

 

4. Water Cooling System

 

5. Auto Discharging System with twin screw , gear chain transmission device, reducer device, run in two opposite direction

 

6. Temperature Control System: Temperature control instrument, induction heating board, induction heating coil.

 

7. Control Board/Temperature controlled/ Inverte

 

 

Features and Advantages

 

1. Environment Friendly, Non-pollution, no waste liquid, no smell at site.

2. Full Automatic and Continuous Production in 24 hours.

3. Easy operation, only need 1 operator per shift

4. Devulcanized rubber powder has good quality

5. Low production cost.

 

II. Rubber refiner(3 Sets)

 

 

Working diameter of rolls	Ø400 mm
Working length of rolls	1010 mm
Working linear speed of front roll	19.34 m/min
Friction ratio of front and rear roll	1:1.2727 m/min
Max. gap	10 mm
Regulate roll way	Manual control
Capacity per.batch	15-20kg
Driving motor power	40 kw/970m/min
Bush way	Nylon bush
Working temperature	≤70°C
Striker plate	Axial restraint

 

 

 

    Looking forward to your pleasant cooperation!