Specifications

1. Bed Surface Transverse Slope:1-4.5
2. High recovery rate
3.Quality:ISO;CE;BV Approved
4.Large handling capacity

Purposes of shaking table
Shaking table is one of the important equipment of beneficiation. It is widely used in the selection of tungsten, sn, molybdenum, plumbum, zinc, niobium and other rare metals and precious metal ores, but also can be used for the selection of iron, manganese ore and coal.

 

Construction of shaking table

Head Motion  The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump.

Decks   The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fiberglass desks also has the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable at ±50°C.

Feed and Water Box A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water.

Base   A choice of ordinary type, groove steel support or big channel steel support is available.

  

Technical parameters of shaking table

Name		Coarse Sand Bed Surface	Fine Sand Bed Surface	Slime Bed Surface
Bed Surface Size	Length (mm)	4450	4450	4450
	Drive End Width (mm)	1855	1855	1855
	Concentrate End Width(mm)	1546	1546	1546
Maximum Feed Size (mm)		2	0.5	0.15
Feed Quantity (t/h)		30-60	10-20	15-25
Feed Concentration (%)		25-30	20-25	15-25
Route (mm)		16-22	11-16	8-16
Frequency ( t/s)		45-48	48-53	50-57
Bed Surface Transverse Slope(degree)		2.5-4.5	1.5-3.5	1-2
Separation Area (m2)		7.6	7.6	7.6
Bed Surface Section Shape		rectangle	sawtooth	triangle
Electric Power (kw)		1.1	1.1	1.1
Drive Type		Eccentric connecting rod mechanism

Pictures of shaking table