Coal and charcoal extruder machine in China

1. General introduction of coal and charcoal extruder machine in China : it is an evergy-saving and environmental-friendly equipment, used to make coal/charcoal sticks by using raw materials like coal dust, coal mud, coal ash, coking coal, charcoal powder, coal and charcoal wastes. Also, this machine can also be used to process agricultural wastes like wood, branches, rice husks, peanut shells and others (please note: if you use these materials should be carbonized into charcoal powder firstly). The final products are shaped by screw press, and the final shapes can be round, hexagonal, quincunx, hollow and other kinds, clients can choose according to their needs!

2. Technical parameter of  coal and charcoal extruder machine in China :

3. Raw material scope of coal and charcoal extruder machine in China : Our machine is widely used in many industries, and many kinds of raw materials can be processed by this machine to make fuel sticks. Gernerally, there are two kinds of materials: raw coal/charcoal powder, coal dust, coal mud, coking coal, charcoal powder; or carbonized agriculture wastes like wood, branch, rice husks, peanut shells, bagasse, cotton stalks, corn stalks, coconut shells, etc. Material requirements: material size should be less than 3mm, and the moisture content should be around 30%-40%. In order to get high density final products, you can use some binder during the production.

4. Spare parts of coal and charcoal extruder machine in China : the most important part of this kind machine is the screw propeller and shaping molds, thus they must be with high quality. Clients can decide the final products length according to their needs. If you like, we can match you a automatic cutter device.

5. Final made products of coal and charcoal extruder machine in China :

6. Usage and maintenance of  coal and charcoal extruder machine in China :   a. Every time before you operate the machine, check every parts to see if there are abnormal noises or not. Empty the machine about 2-3 minutes, then feed materials to produce. b. The materials should be processed well before feeding: the size should be less than 3mm, adding water, adhesives or curing agents, stir and keep them for 24 hours. c. If the discharge port is blocked, use a batten or bamboo splint to dredge it, don't use a metal bar to do it. d. The machine rotating parts bearings should be added lubricating oil regularly, the bearing temperature should not exceed 60℃. e. Stop feeding materials before stop the machine, when the cylinder is empty without materials, you can stop the machine. Remove the machine head, clean it and re-install it, for the next use.

7. Other picture shows of coal and charcoal extruder machine in China :

8. Why choose us?---Good quality+Good price+Good service! We take the quality as the most important thing to ensure customers get products with good quality if they buy from us. The prices we offered are reasonable and competitive compared with suppliers in the same field, we often give our first-cooperate clients some discount, just for establish long standing business relationship in the future. We also have professional pre-sales and after-sales service system, if you have any questions any time, we are always here to offter you help! My friend, if you have interests with our products, please send us inquiry by the following contact details, give us a chance to show you our products and service!