Product Details

low price 1000kg mini pneumatic hammer for screws C41-1000

Product Description

It mainly used to free forging,drawing,upsetting,punching,hot shearing,forged welding,bending,torsion and foetal,standard forge

Widely used for general Forging works, such asdrawing-out, upsetting, punching, chiseling, forging welding, bending and twisting. It is also used for forging in bolster dies.

Features:

1. Unlike steam hammers or air hammers fed from a supplementary compressor, the Pneumatic forging hammer with its self-contained cylinder,require no ancillary power raising plant.
2. The Pneumatic forging hammer is equipped with a self-priming lubricating oil pump, during operating, it can realize the automatic lubrication.
3. Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired.

Rated weight of the tup(kg)		1000
Minimum blow energy(kj)		27
Number of blows per minute(min-1)		95
Height of working area (mm)		800
Distance between tup centre axis and frame front(mm)		800
Maximum round steel can be forged(Diameter)(mm)		320
Maximum square steel can be forged(mm)		290 x 290
Maximum round steel can be forged(mm)		320
Machine floor space(L x W)(mm)		4125 x 4000
Machine height(above the ground)(mm)		3662
Motor	Type	Y315S-6
	Rate power(kw)	75
	Speed(r/min-1)	988
Total weight of the hammer (kg)		Hammer 2000
		Anvil block1300
Outside size(mm)		3770x1500x4125