Name: tungsten carbide HDD drilling tools weld on teeth
Brand: Lipai
Availability: InStock

Product Details

Type E4

Application for making broaching drill bits.

Type As below : E415, E418,E420,E425, E430.

Grade as below: YG3, YG6A,YG6X,YD201,YG6,YG8,YG15/14, YT5,YW1, YW2,YS25,YC40,YC45,YS8,YT26,YM40

Brazed turning inserts

Grade	ISO Code	Performance			Performance&application recommended
		Density	Hardness	Bend Strength
		G/Cm³	HRA	N/mm²
YG3	K05	15	90.5	1300	Suitable for finishing of cast iron and nonferrous metal.
YG6X	K10	14.8	91	1560	The finishing&semi-finishing of cast iron and nonferrous metals and also
					for the machining of manganese steel and hardening steel.
YG6A	K10	14.7	91.5	1510
YG6	K15	14.9	89.5	1670	Suitable for the roughing of cast iron and light alloys and also for the
YG8	K20	14.6	89	1840	milling of cast iron and low-alloy steel.
YW1	M10	13	91	1290	Suitable for finishing and semi-finishing of stainless steel and
					alloy steel.
YW4	M10	12.3	92	1390	conventional alloy steel.
YW3	M10	12.9	92	1390
YW2	M20	12.9	90.5	1460	The grade can be used for the semi-finishing of stainless steel and low-
					alloy steel and it is mainly used for the machining of railway wheel hubs.
YT15	P10	11.3	91	1300	Suitable for the finishing and semi-finishing for steel and cast steel with
YT05	P10	12.6	92.5	1260	a moderate feed rate and rather high cutting speed.
YT14	P20	11.4	90.5	1400	Suitable for the finishing and semi-finishing for steel and cast steel .
YS14	P20	11.4	91.5	1550
YS25	P20	13	90.5	1780	YS25 is specially used for the milling of steel and cast steel.
YT5	P30	12.8	89.5	1560	Suitable for the heavy duty rough turning of and cast steel with a big feed
					rate at a medium and low speed under unfavorable working conditions.
YT26	K05-K10/M20	14	92.5	1600	Suitable for fine and semi-finishing machining of chilled cast iron and non
					ferrous metals with good performances of the mosetting and wear resistance
					,also suitable for turning and milling of manganese steel and hardened steel.
YD201	K20	14.9	91	1800	Suitable for semi-finishing and the roughing of cast iron and lisht alloys and also
					for the milling of cast iron and low alloy steel.
YS8	M05-M10	13.9	92.5	1720	It can be used for the finishing of iron based and nickel based high-temperature
					alloys and high -strength steel and it can also be used for the finishing of chilledcast iron, heat resistant
					sfainless steel, high manganese steel and bardend steel.
b60	M10	12.8	92.5	1500	Mainly used for threading of petroleum pipe, also used for fine machining of
					hardened steel.
YM20	M20	13	91	1750

YC30S	P30	12.9	90	1600	Used for the milling of steel, cast steel and alloy steel.
YC40	P35-P40	12.9	91	2200	Suitable for the heavy duty turning of steel and cast steel with a big feel rate under
					unfavorable working condifion.
YM40	P40	12.75	90	2100	Suitable for the heavy duty turning of steel and cast steel with a big feel rate and
YC45	P40	12.75	90	2300	for face milling.