tungsten carbide progressive stamping die
USD $50 - $60 /Kilogram
Min.Order:5 Kilograms
Zhuzhou Hongtong Tungsten Carbide Co., Ltd.
1) More than 10 years production experience
2) Made from 100% raw virgin material
3) Advanced equipments
4) All products go through process and final inspection
5) Small or Trail order can be accepted
Products information:
Tungsten Carbide progressive stamping die,
High impact resistance ,Toughness,wear resistance,and quality consistency. You are encouraged to use our professional carbide grades for cold heading &punching die nibs. Power metallurgical Compacting dies and other industries.For stable performance and high-cost-effectiveness.They have been proved to be ideal in making non-ferrous metal , ferrous metal and their alloys.
All of our heading dies are sintered by HIP furnace, and we used the excellent raw material, our heading dies was exported to Germany, Italy, Turkey, South east Asia and Japan, the qty of our heading die production is over 20 MT per month, and the quality if very competive.
Grade | Density g/cm3 | Hardness HRA(HV) | T.R.S(Mpa) | Performance & applications recommended |
YG6 | 14.9 | 89.5 | 2150 | Good wear resistance, used for hard wood, processing orginal wood, aluminum section bar,brass rod and casr iron. |
YG8 | 14.6 | 89 | 2320 | Suitable for the rouhening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
YG11 | 14.4 | 87.5 | 2260 | Medium grain, for wear parts and mining tools. |
YG15 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies. |
YS2T | 14.45 | 92.5 | 2800 | Fine carbide, high wear resistance, high bending strength, high resistance to nonding, high thermal strength.Machining of refractory alloys, stainless steel and high manganese steel etc.Mainly used for disc cutter and other tools |
YL10.2 | 14.5 | 92.5 | 3400 | Wear resistance and strength comparatively higher,suitable for processing cast iron,non-ferrous metal and non-metalloid materials. |
YNI8 | 14.6 | 88.5 | 1710p | This grade with 8% nickel binder, it has good wear resistance &corrosion resistance performance, especialy used for high pressure environmental,also good for cutting the titanium alloy. |
Consolidation of cemented carbide <img
About our service:
1) OEM & ODM are welcomed;
2) Customized design is available;
3) Reply your enquiry in 24 working hours;
4) Experienced staffs answer all your questions in fluent English.
Payment Terms:
We accept T/T, L/C , Paypal ,Western Union ,ESCROW. Regarding T/T payment, the customers need to pay 30% in advance; the balance will be paid off after finish hed production before shipment. Regarding L/C payment, we just accept the irrevocable L/C, and buyer should pay all handle fee of the Ban k include our bank hand fee.
Company information
<img