Specifications

Made from 100% raw virgin material
High hardness &density
Good corrosion resistance
Good abrasive resistance

bolt nut forming die punch

 

Advantage of our carbide products:

1) More than 10 years production experience

2) Made from 100% raw virgin material

3) Advanced equipments

4) All products go through process and final inspection

5) Small or Trail order can be accepted

 

Products information:

Tungsten Carbide progressive stamping die,

 

High impact resistance ,Toughness,wear resistance,and quality consistency. You are encouraged to use our professional carbide grades for cold heading &punching die nibs. Power metallurgical Compacting dies and other industries.For stable performance and high-cost-effectiveness.They have been proved to be ideal in making non-ferrous metal , ferrous metal and their alloys.

 

All of our heading dies are sintered by HIP furnace, and we used the excellent raw material, our heading dies was exported to Germany, Italy, Turkey, South east Asia and Japan, the qty of our heading die production is over 20 MT per month, and the quality if very competive.

 

Grade recommend:

Grade	Density g/cm3	Hardness HRA(HV)	T.R.S(Mpa)	Performance & applications recommended
YG6	14.9	89.5	2150	Good wear resistance, used for hard wood, processing orginal wood, aluminum section bar,brass rod and casr iron.
YG8	14.6	89	2320	Suitable for the rouhening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG11	14.4	87.5	2260	Medium grain, for wear parts and mining tools.
YG15	14.1	86.5	2400	Medium grain, for mining tools, cold heading and punching dies.
YS2T	14.45	92.5	2800	Fine carbide, high wear resistance, high bending strength, high resistance to nonding, high thermal strength.Machining of refractory alloys, stainless steel and high manganese steel etc.Mainly used for disc cutter and other tools
YL10.2	14.5	92.5	3400	Wear resistance and strength comparatively higher,suitable for processing cast iron,non-ferrous metal and non-metalloid materials.
YNI8	14.6	88.5	1710p	This grade with 8% nickel binder, it has good wear resistance &corrosion resistance performance, especialy used for high pressure environmental,also good for cutting the titanium alloy.

 

 

Consolidation of cemented carbide <img

 

About our service:

1) OEM & ODM are welcomed;

2) Customized design is available;

3) Reply your enquiry in 24 working hours;

4) Experienced staffs answer all your questions in fluent English.

 

Payment Terms:

We accept T/T, L/C , Paypal ,Western Union ,ESCROW. Regarding T/T payment, the customers need to pay 30% in advance; the balance will be paid off after finish hed production before shipment. Regarding L/C payment, we just accept the irrevocable L/C, and buyer should pay all handle fee of the Ban k include our bank hand fee.

 

Company information

<img