Product Details

Exploding isolation type high-voltage vacuum distribution device used for mining

Product Introduction

FD mine exploders

good quality

cheap price

Use special tools to open the shell back cover then put into the battery before use. Attention the

battery polarity can’t opposite. Don’t touch the face of exploder-proof. Tighten the screws after put into battery. It can be used with an explosive mixture of methane and coal dust coal mine.

Ambient temperature: 0~+40°C

Ambient air relative humidity less than 95% (When at 25 °C)

Atmospheric pressure: 80~106kpa

Ambient temperature storage environment: -40°C~+60°C

Technology Parameters

Model	FD-50	FD-100	FD-150	FD-200
Rated shot	50	100	150	200
Rated load resistance Ω	320	620	920	1220
Peak voltage V	900	1900	2400	2800
Intrinsic safety voltage Uo[V]	6	6	6	6
Intrinsic safety output current Io[mA]	6-20	6-20	6-20	6-20
Maximum open circuit voltage V	6	6	6	6
Max. short-circuit current A	5	5	5	5
Conduction test loop current mA	6-20	6-20	6-20	6-20
Specification of battery	1# Dry cell, voltage 1.5 V
Battery number (section)	4	4	4	4
Rated detonated times	50	100	150	200
Charging time S	≤10	≤20	≤20	≤20
Safe power supply time ms	≤4	≤4	≤4	≤4
Ignition impulse A2ms	8.7<12.0	8.7<12.0	8.7<12.0	8.7<12.0
Allowed external bus length m	≤300	≤300	≤300	≤300
Bus distributed inductance mH/km	≤0.1	≤0.1	≤0.1	≤0.1
Bus distributed capacitance uF/km	≤0.1	≤0.1	≤0.1	≤0.1

The real details photo