Product Details

Circular saw gear grinding machine

Related products

Product Feature

All cast iron is made of nodular graphite cast iron (FCD-45) in order to ensure the accuracy and increase the wear resistance.
All the adjusting rods are carefully arranged so that the cutting angle can be easily adjusted, the back gap angle, the tooth depth and the pitch angle can be easily and quickly and accurately
Use variable belt pulley,Can be changed with the change of pitch to adjust the required speed.
The grinding wheel head can swing up and down,So can not replace the grinding wheel, can be easily grinded chamfer
Saw blade thickness variation,Can be easily adjusted,And there is a scale can be directly seen in the thickness of the tune
The driving part is driven by the grinding wheel motor and the structure.,In order to achieve the true, safe transmission
The end of the feed claw has a super hard tungsten carbide,The wear and tear of the feed claw can be reduced to the lowest, and the accurate feed can be achieved..

Attention

This machine is mainly for grinding high speed steel circular saw blade
May be repaired with 50~480mm diameter, 8mm thick circular saw blade milling cutter
Material is not limited, can be based on your actual blade material to buy grinding wheel
Grinding wheel according to national standards, the market can buy
If your blade diameter is less than 50mm, you can customize the fixture with me, the model unchanged

Specification

Detail

Shippment