Different Size Tungsten Carbide Rods
USD $10 - $80 /Kilogram
Min.Order:1 Kilogram
Zhengtong Special Material Factory Hi&New Tech Zone Chengdu
Different Size Tungsten Carbide Rods
Tungsten carbide rods, Tungsten carbide rods, Tungsten carbide rods, Tungsten carbide rods, Tungsten carbide rods, Tungsten carbide rods, Tungsten carbide rods, Tungsten carbide rods, Tungsten carbide rods, Tungsten carbide rods , Tungsten carbide rods,
Tungsten Carbide Rods Description:
Tungsten carbide rods applications include drill bits, end mills, and reamers. Custom
diameters and length are also available in these grades as well as metric sizes.
They are manufactured as standards with one, two, or three holes, straight or twisted
to a 30 or 40 degree helix, or solid with no holes. All rods are available in standard
lengths of 310 and 330 mm. Custom lengths available by request.
Tungsten Carbide Rods Category:
Product Type | OD | Tolerance of OD | ID | Tolerance of ID | Length | Tolerance of L |
Sintered tungsten carbide rods | 0.5-50.0mm | +/- 0.3mm | / | / | 10-500mm | +/- 5.0mm |
Finished tungsten carbide rods | 0.5-50.0mm | +0/-0.006mm | / | / | 10-500mm | +0.5mm |
Tungsten carbide rods for PCB tools | / | +/- 0.05mm | / | / | +/- 0.2mm | |
Tungsten carbide rods with a straight coolant hole | 2.0-50.0mm | +/- 0.2mm | 0.3-10mm | +/- 0.1mm | 310mm, 330mm | +/- 5.0mm |
Tungsten carbide rods with two straight coolant holes | 4.0-50.0mm | +/- 0.5mm | 0.3-10.0mm | +/- 0.1mm | 310mm, 330mm | / |
Tungsten carbide rods with two helical holes | 5.0-50.0mm | +/- 0.3mm | 0.5-10mm | +/- 0.1mm | 310mm, 330mm | / |
Tungsten Carbide Rods Display:
Q:What is cemented carbide ?
A: Cemented carbide is a hard material used in machining tough materials such as carbon steel or stainless,
as well as in situations where other tools would wear away, such as high-quantity production runs.
Most of the time, carbide will leave a better finish on the part, and allow faster machining. Carbide tools can
also withstand higher temperatures than standard high speed steel tools.
Q:What are the key properties of cemented carbides I should be concerned with when selecting a grade
for my application?
A: The key properties of cemented carbides that define their performance level for different applications include
abrasion resistance (directly related to the hardness of the grade), fracture strength, and fracture toughness.
In general, the abrasion resistance or hardness of any grade is inversely proportional to its fracture toughness.
Very often grade selection involves finding the best compromise between abrasion resistance and toughness.
In some instances strength and corrosion resistance can be important factors in the grade selection process.
Q: Which properties are important in metal cutting applications?
A: Depending upon the type of metalcutting operation (turning, milling, drilling, etc.), different combinations of
properties is needed in order to obtain optimum results. For example, in turning and drilling applications the
cutting tool is in continuous contact with the workpiece. Hence, for these applications, abrasion resistance and
strength are the most important properties to consider. However, in operations such as milling, which invariably
involve interrupted cutting, and hence high impact forces, toughness can be an important factor.
Grades employed for metalcutting applications are usually based on fine to medium hard phase grain sizes
(0.5 to 1.5 mm) and low to medium Co contents (6 to 15 wt.%).
Q: Which grades are useful in metal forming applications?
A: In contrast to metalcutting (where abrasion resistance and strength are of paramount importance),
cemented carbides used in metalforming applications will invariably be subject to high impact and shock forces.
Hence, grades used for metalforming applications must possess high toughness levels with adequate abrasion
resistance and strength. Grades employed for metalforming applications are typically based on coarse
grain sizes (3 to 8 mm) and high binder contents (15 to 30 wt. %).
Q: Which grades are useful in earth drilling or boring applications?
A: In many respects the characteristics of the grades employed for earth drilling and boring represent a
compromise between the characteristics that are important for metalcutting and those that are important
for metalforming applications. Grades for earth drilling and boring must possess the highest toughness
levels for any given abrasion resistance level, while simultaneously possessing adequate strength levels.
The best compromise is usually arrived at by using grades that are based on coarse grain sizes (3 to 8 mm)
and relatively low Co levels (6 to 16 wt. %).
Q: How can I choose the most suitable products for my applications?
A: 1.Correct installation site depends on specific size and drawings. Especially for dies processing,
drawings can ensure the finished products are qualified.
2. Processing objects and working environment is determined by cemented carbide grades.
Products' lifetime can be greatly extend if grades are right.
tungsten carbide rods, tungsten carbide rods ,tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods
tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods, tungsten carbide rods