Specifications
Shantui SD22 bulldozer is 22 ton uses Cummins engineShantui SD22 bulldozer specfication
SpecificationBlade Type | Straight-tilt | Angle | U-type | R-blade | Coal blade |
Min.ground clearance(mm) | 405 | 405 | 405 | 513 | 405 |
Ground pressure(MPa) | 0.077 | 0.077 | 0.078 | 0.041 | 0.078 |
Min.turning radius(m) | 3.3 | 3.3 | 3.3 | 3.8 | 3.3 |
Gradeability(') | 30 | 30 | 30 | 30 | 30 |
Track gauge(mm) | 2000 | 2000 | 2000 | 2250 | 2000 |
Dozing capacity(m3) | 6.4 | 4.7 | 7.5 | 10.2 | 9 |
Efficiency(Theoretical value in 40m)(m3 /h) | 330 | 245 | 365 | 413 | 450 |
Blade width(mm) | 3725 | 4365 | 3800 | 4160 | 4200 |
Blade height(mm) | 1315 | 1055 | 1343 | 1870 | 1350 |
Max.drop below ground (mm) | 540 | 535 | 540 | 540 | 540 |
Max.tilt adjustment(mm) | >735 | >500 | >755 | >755 | >755 |
Weight(kg) | 3630 | 3850 | 4196 | 3067 | 3464 |
ENGINE:
Model............Cummins NT855-C280 BCIII
in-l ine,water cooled 4-cycle,overhead valve direct injection,turbocharged diesel
Rated revelution............1800rpm
Rated horsepower............162KW
Cylinder number-bore*stroke............ 6-139.7mm*152.4
Piston displacement............14010ml
Min fuel consumption............ 205g/KW.h
Max torque............ 1030NM/1250rpm
in-l ine,water cooled 4-cycle,overhead valve direct injection,turbocharged diesel
Rated revelution............1800rpm
Rated horsepower............162KW
Cylinder number-bore*stroke............ 6-139.7mm*152.4
Piston displacement............14010ml
Min fuel consumption............ 205g/KW.h
Max torque............ 1030NM/1250rpm
TRAVEL SPEED:
Gear | 1st | 2nd | 3rd |
Foward(km/h) | 0-3.6 | 0-6.5 | 0-11.2 |
Reverse(km/h) | 0-4.3 | 0-7.7 | 0-13.2 |
UNDERCARRIAGE SYSTEM:
Type............Swing type of sprayed beam,suspended structure of equalizer bar
Carrier rollers............2/each side
Track rollers............6/each side(single flange4,double flange2)(E-7/each side)
Track type............Assembled single-grouser shoes(38/each side)
Width of track shoes............560mm
Pitch............216mm
Carrier rollers............2/each side
Track rollers............6/each side(single flange4,double flange2)(E-7/each side)
Track type............Assembled single-grouser shoes(38/each side)
Width of track shoes............560mm
Pitch............216mm
OVERALL DIMENSION:
Straight_tilt 5750*3725*3395mm
