KAISHAN Group- air compressor with series as below:

1. 1.       KAITEC Series screw air compressor

1)      KAITEC Series can offer the industry most reliable and energy efficient compressed air packages. Each compressor component has been thoroughly evaluated for its reliability and efficiency and optimized for easy servicing.

2)      Kerry oil separator elements: oversized elements ensure minimal pressure drop and low residual oil carryover (<2mg/m3) resulting in better quality air and lower power costs. Elements are manufactured to exacting standards in the USA.

3)      Kerry compressor fluids: a custom blended PAO long life synthetic hydrocarbon lubricant provides premium lubrication at all operating temperatures. Reduced volatility. Rust and oxidation inhibitors. Kerry 8000 and 8000+ lubricants are available.

4)      Cooling system: an effective single pass cooling system is vitally important to ensure reliability and efficiency in high ambient conditions. Low noise level. Low power consumption. VSD drive 110kw and above.

5)      Kaishan control panel: over temperature protection. Over pressure protection. Run on timer-shut down on no load. Run down timer-loaded restart protection. Phase failure/reversal protection.

1. 2.       KAITAIN Series screw air compressor

1)      KAITAIN Series direct drive rotary screw air compressors are built to exacting standards to deliver outstanding efficiency and reliability. Compressors with a proven industry track record for performance in the most arduous of operating conditions.

2)      Advanced control system: the internal multi-compressor control system allows up to sixteen compressors to be sequenced ensuring all units operate in their most efficient operating mode.

3)      High efficiency drive motor: high efficiency. TEFC to IP54 with class F insulation. SKF Bearings.

4)      Cooling system: an effective single pass cooling system is vitally important to ensure reliability and efficiency in high ambient conditions. Axial cooling fan incorporating a high efficiency motor. Low noise level.

1. 3.       KAISHAN Series (LG Series) screw air compressor

1)      LG Series screw air compressor is the standard series of KAISHAN and each model has reached level two energy efficiency. Among the products that achieved level two energy efficiency defined in the national energy efficiency standard, KAISHAN’s LG Series is most cost-effective.

2)      Air end-rotor: SKK series rotor profiles originated in England but are owned by KAISHAN Compressor. SKK series air end is our time proven rotary screw air end. The precision machined air end increases the reliability and operating life.

3)      Electronic pressure controller and solenoid valve: highly reliable compact design. Easy to install. Fast response 2-way and 3-way solenoid valves.

4)      Integrated microprocessor controller: easy to use and maintenance free. Constant readout of pressure and temperature. Selective readout of all operating and maintenance parameters. Safety shutdown. Provides 24 hours automatic start-stop operation. Lead-lag and sequencing with multiple compressors.

5)      Drive motors: IEC high efficiency drive motors. IP54 and high temperature F class rating. Direct coupling design for extended bearing life. Easy maintenance with grease refill port.

6)      Superior filtration system: ultra efficient Kerry inlet air filters provide clean air that traps dirt particles to less than 3 microns. Easy spin on Kerry Oil filters. Pressure Differential gauges for easy filter maintenance.

1. 4.       KAISHAN Series reciprocating/piston air compressor

Reciprocating/piston air compressor widely used in pneumatic lock, pneumatic tool, the inflation, blowing process, spray, sand blasting and fluidic element.

Our MAJOR PRODUCTS
INCLUDE: HORIZONTAL AND VERTICAL AXIS SERIES FOUR-STROKE GENERAL GASOLINE
ENGINES AND TERMINAL PRODUCTS WITH AN OVERHEAD VALVE. THE PRODUCTS ARE
SOLD TO MANY COUNTRIES AND REGIONS AROUND THE WORLD.
IN 1999, A GASOLINE ENGINE DEPARTMENT WAS ESTABLISHED TO RESEARCH AND
DEVELOP SMALL GENERAL GASOLINE ENGINES.
IN 2000, YANCHENG JIANGDONG GASOLINE ENGINE MANUFACTURING CO., LTD. WAS
OFFICIALLY ESTABLISHED.
IN 2002, THE PRODUCTS SUCCESSFULLY PASSED THE EPA CERTIFICATION. BY NOW, A
DOZEN OF MODELS HAVE PASSED THE EPA CERTIFICATION.
IN 2004, THE PRODUCTS SUCCESSFULLY PASSED THE CARB CERTIFICATION.
IN 2005, IT PASSED THE ISO-9000 QUALITY MANAGEMENT SYSTEMS CERTIFICATION.
IN 2006, THE PRODUCTS PASSED GS AND CE CERTIFICATION AND ENTERED THE EUROPEAN
MARKET.
IN 2007, IT ESTABLISHED A LONG-TERM COOPERATIVE RELATIONSHIP WITH B&S FROM
AMERICA, THE WORLD’S LARGEST MANUFACTURER AND SELLER OF GENERAL ENGINES.
IN JULY, 2012, THE COMPANY WAS RELOCATED TO THE NATIONAL DEVELOPMENT
ZONE--JD INDUSTRIAL PARK OF THE ECONOMIC AND TECHNICAL DEVELOPMENT ZONE IN
YANCHENG, WITH PRODUCTION AND SALES SCALE OVER A MILLION SETS.