Hydraulic C-frame Press YC2.5T
USD $5,000 - $15,000 /Set
Min.Order:1 Set
Zhengzhou Timeway Machine Tool Co., Ltd.
Hydraulic C-frame Press
Features:
1. The Hydraulic C-frame Press machine is a kind of medium hydraulic press with multifuctions.
2. It suitable for the calibration of the parts like bearings and moulding materials, and for the arber of parts like bearings and sleeves.
3. It can complete the technology function of bending, marking and shelling of plate material parts, and the function of stretching of simple parts.
4. It can also be used to press powder and plastic products which the requirements are not strict.
Specifications | Unit | YC2.5T | YC4T | YC6.3T | |
Nominal force | KN | 25 | 40 | 63 | |
The max. working pressure of the fluid | Mpa | 5 | 8 | 8 | |
The max. distance between the under surface of the slipperand the surface of the working table | mm | 350 | 380 | 400 | |
The max. stroke of the slipper | mm | 160 | 200 | 250 | |
Downlink velocity of the slipper | mm/s | 50 | 50 | 50 | |
Return velocity of the slipper | mm/s | 100 | 100 | 100 | |
Throat depth | mm | 160 | 180 | 200 | |
Thre size of the working stable | Front, Rear | mm | 320 | 320 | 400 |
Left, Right | mm | 480 | 480 | 500 | |
The height of the working table to the surface of the floor | mm | 700 | 710 | 700 | |
The diameter for cutting hole | mm | 70 | 70 | 80 | |
The diameter of cylinder hole | mm | 80 | 80 | 100 | |
The diameter of the center of plunger bar( hole of cross handle) | mm | 18 | 18 | 30 | |
The depth of the center of plunger bar( hole of cross handle) | mm | 30 | 30 | 60 | |
The screw thread diameter of plunger bar | mm | 36 | 36 | 50 | |
Description of oil pump | Medium, high pressure vane pumps | ||||
The power for motors | kw | 1.5 | 1.5 | 2.2 | |
The configuration size of the machine tool | Front, Rear | mm | 750 | 750 | 900 |
Left, Right | mm | 600 | 600 | 610 | |
The height above the floor | mm | 1700 | 1700 | 1800 | |
Total weight(approx) | T | 0.6 | 0.7 | 1 |