New Wood Peeling Machine

Components of Wood Peeling Machine :

Peeling roller, feeding port, skin exit, wood exit, power transmission device.

Advantages of  Wood Peeling Machine :  

1. It overcomes the weakness that traditional drum-type wood peeling machine have to stop while discharging and feeding, 

2. It separates skin exit from wood exit, realizing continuous work, from the feeding, to peeling, to discharging the wood, to feeding again, to peeling again, to discharging the wood again, the whole process is continuous, accomplishing operation flow, automatic production.

3.To different wood species, peeling effect can be adjusted. All can be peeled regardless of the length, bending, spiral, and dry and wet. 
4.Stand-alone operation can peel 35 to 50 tons logs, greatly saving the manpower.

Application of Wood Peeling Machine

It is widely used in fiber plate mill, paper mill, veneer rotary cut factory, wood factory, pulp factory, wood storage plant, and forest, etc. The peeling effect is really super for popular woods such as eucalyptus, popla, and it is a matched equipment suitable for assembly line work.

Working Principle of Wood Peeling Machine

The unique acting force produced by the rotor with step type peeling teeth make the lumber sections do circular motion in cycles in the bunker tank plate. Besides, the lumber sections do rotary motion around their own axis and jump irregularly, so that the lumber sections and the teeth, the lumber sections and the lumber sections, the lumber sections and the bunker tank and the pecten constantly rub, impact, extrude, strip against each other,  the bark and trunk are resolved and stripped rapidly, achiving efficient peeling effect. Wood peeling machine is mainly comprised of feeding mechanism, discharging mechanism, cutter disc, transmission system, chassis, etc.

Features of  Wood Peeling Machine

1 Four-sideedge tool is adopted, convenient to use, low cost.

2 Cutter disc pressure regulating is controlled by hydraulic system, advanced structure, reliable performance.
3 Feeding mechanism adopts stepless variable speed, having good peeling effect in difficult peeling tree species such as frozen wood, bending wood, eucalyptus, oak wood, elm, etc.

4 High peeling clarity, high productivity, small woodiness damage.

Operation Process of Wood Peeling Machine

Load the logs, tree branches, etc into the roll groove, close the feed baffle, start the machine, operate claockwise.  With the operation of the machine, the woods in the roll groove are stripped by the strip bar. Fifteen minutes later, close the machine, open the discharge baffle, then start the machine and operate counterclockwise two minutes, and then the woods well peeled will be diacharged automatically from the roll groove. The stripping net rate can reach 95%.

Technical data:

This is our factory:

Wood logs that after peeled: