Product Details

Product Description

Name	wet pan mill
feature	Reduce the loss of mineral powder, so that resources can be fully utilized
Application	separate Gold, silver, lead, zinc, iron, molybdenum, copper, antimony ore, etc
working priciple	Grind gold machine mainly for raw materials by stirring, rolling, crushing, rolling after repeated water reaches equilibrium, the ratio of uniform, low gas content, increase the rate of forming and shaping the quality of the material through the machine grinding molding products, With high density, good strength, non-stomatal ratio and so on. High efficiency, high output, the product is used in iron ore tailings for recycling process, not to the loss of slag, so that effective resources can be fully utilized
working way	Grind gold machine in the election prime sorting methods and processes -1. grind gold machine after the installation is completed to grind gold machine bottom added about 5 kg of mercury began to work. 2 .charged once per shift Sands, in the shift added 1 kg of mercury charged grind bottom Sands and mercury, the mercury Sheng received gold instruments, the use of relatively high density of red cloth wrung mercury to the package, open the red cloth Sands is left inside. 3. each class starts to add one kilogram of mercury on it. Comprising a grasping cloth of gold or gold carpet caught behind and put on the board of mercury can collect the gold.
Advantages	1. grinding wheels and grinding base are made of high manganese steel. it is very hard and rigid, using life will be doubled 2. 6 phases motor, can reduce energy consumption 3. easy installation and maintenance, small investment, high yield, quick, low-cost production,

The operation and maintenance

1) The raw material should be put into the machine after the machine running normally.

2) This machine is not allowed to state with the material in the machine. If the machine is stopped because of stoppage, the residual material in the machine should be cleared. Then start the machine again.

3) The material should be put into the machine uniformity, not sometimes much sometimes less. It's better to use a feeding equipment.

4) The bearing part should be add butter regularly.

5) Every bolts should be checked to avoid flexible.

6) The bearing should be changed in time if it is damaged to avoid damage other parts.

7) While the machine is running formally, you should check if there is abnormal sound in the reducer box and or bearing part, if there is a too high temperature, if there is too big motor current and so on. If it happened, you should stop the machine to remedy of the trouble.

8) The motor V-belt should be removed while examine and repair the machine for your safe.

our technical engineer will privod technical services in a year.

Model	Specification	Input size(mm)	Process ability (t/h)	Speed (r/min)	Motor (kw)	Weight (t)
1600	1600×400×±20	Less than 30mm	4	20-22	6-30	17
1500A	1500×400×±20		3	20-22	6-22	15
1500B	1500×350×±20		2.5-3	20-22	6-22	14
1500C	1500×300×±20		2-2.5	20-22	6-22	12.5
1400	1400×250×±20		1.5-2	16-18	6-18.5	9.5
1300	1300×250×±20		1.5	21-23	6-15	7.8
1200A	1200×220×±20		0.9-1.2	16-18	4-7.5	6.0
1200B	1200×200×±20		0.8-0.1	21-23	4-7.5	5.8
1100	1100×200×±10		0.6-0.8	16-18	4-5.5	5.5
1000	1000×200×±10		0.5	21-23	4-5.5	4.5
900	900×150×±10		0.3	17-19	3kw	3.2

Speed reducer used in wet pan mill

♥The raw material should be put into the machine after the machine running normally. This machine is not allowed to state with the material in the machine. If the machine is stopped because of stoppage, the residual material in the machine should be cleared. Then start the machine again.

♥The material should be put into the machine uniformity, not sometimes much sometimes less. It's better to use a feeding equipment.The bearing part should be add butter regularly.Every bolts should be checked to avoid flexible.

♥The bearing should be changed in time if it is damaged to avoid damage other parts.While the machine is running formally, you should check if there is abnormal sound in the reducer box and or bearing part, if there is a too high temperature, if there is too big motor current and so on. If it happened, you should stop the machine to remedy of the trouble.

♥The motor V-belt should be removed while examine and repair the machine for your safe.

Company Information

Annual Production Capacity(Last Year) Verified

Product Name	Production Line Capacity	Actual Units Produced(Previous Year)
Crusher	600 Sets Per Year	confidential
Ball Mill	120 Sets Per Year	confidential
Wet Pan Mill	720 Sets Per Year	confidential
Dryer	120 Sets Per Year	confidential
Vibrating Screen	240 Sets Per Year	confidential