40x400 inches rotary dryer /mining ore drying machine with durable spare parts
USD $1 - $99,999 /Set
Min.Order:1 Set
Zhengzhou Huahong Machinery Equipment Co., Ltd.
Features of drying ratory dryer :
1.Robust construction
2.High capacity, easy operation, continuously working
3.Adaptation for wide temperature range
4.Co-current or counter-current drying
5.Wide application range, from various minerals, chemicals to biomass, etc.
6.Specially designed lifting flights to maximize heat transfer
Application
Allowed to high temperature and featured with high capacity, bagasse drying machine is widely used in various aspect. Initially, rotary dryer is used to dry various minerals and ores. Then it expands to the agriculture, chemical, building materials, biomass, metallurgy, cement industry. Many wastes could be reused or recycled after being dried, such as clay, coal, quartz sand, gypsum, fly ash, sewage sludge, biomass, wood chips, sawdust, forage, alfalfa, chicken manure, etc.
Working principle:
drying ratory dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters bagasse drying machine, and as the dryer rotates, the material is lifted up by a series of internal flights lining the inner wall of the dryer. When the material gets high enough to roll back off the flights, it falls back down to the bottom of the bagasse drying machine, passing through the hot gas stream as it falls.
This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). In bagasse drying machine, solids are dried as they are transported along the interior of a rotating cylinder or drum.
Main technical parameter:
Model (mm) | Obliquity(%) | Rotation speed (r/min) | Feeding temperature (degree) | Power (kw) | Capacity(t/h) | Weight (t) |
Ø600x6000 | 3-5 | 3-8 | <=700 | 3 | 0.5-1.5 | 2.9 |
Ø800x8000 | 3-5 | 3-8 | <=700 | 4 | 0.8-2.0 | 3.5 |
Ø800x10000 | 3-5 | 3-8 | <=700 | 4 | 0.8-2.5 | 4.5 |
Ø1000x10000 | 3-5 | 3-8 | <=700 | 5.5 | 1.0-3.5 | 5.6 |
Ø1200x10000 | 3-5 | 3-8 | <=700 | 7.5 | 1.8-5 | 14.5 |
Ø1200x12000 | 3-5 | 3-8 | <=700 | 11 | 2-6 | 14.8 |
Ø1500x12000 | 3-5 | 2-6 | <=800 | 15 | 3.5-9 | 17.8 |
Ø1800x12000 | 3-5 | 2-6 | <=800 | 18 | 5-12 | 25 |
Ø2200x12000 | 3-5 | 1.5-6 | <=800 | 18.5 | 6-15 | 33 |
Ø2200x18000 | 3-5 | 1.5-6 | <=800 | 22 | 10-18 | 53.8 |
Ø2200x20000 | 3-5 | 1.5-6 | <=800 | 30 | 12-20 | 56 |
Ø2400x20000 | 3-5 | 1.5-5 | <=800 | 37 | 18-30 | 60 |
Ø3000x20000 | 3-5 | 1.5-5 | <=800 | 55 | 25-35 | 78 |
Ø3000x25000 | 3-5 | 1.5-5 | <=800 | 75 | 32-40 | 104.9 |
English standard parameters:
Model (inches) | Obliquity(%) | Rotation speed (r/min) | Feeding temperature (degree) | Power (kw) | Capacity(t/h) | Weight (t) |
Ø24''x240'' | 3-5 | 3-8 | <=700 | 3 | 0.5-1.5 | 2.9 |
Ø32''x320'' | 3-5 | 3-8 | <=700 | 4 | 0.8-2.0 | 3.5 |
Ø32''x400'' | 3-5 | 3-8 | <=700 | 4 | 0.8-2.5 | 4.5 |
Ø40''x400'' | 3-5 | 3-8 | <=700 | 5.5 | 1.0-3.5 | 5.6 |
Ø48''x400'' | 3-5 | 3-8 | <=700 | 7.5 | 1.8-5 | 14.5 |
Ø48''x480'' | 3-5 | 3-8 | <=700 | 11 | 2-6 | 14.8 |
Ø60''x480'' | 3-5 | 2-6 | <=800 | 15 | 3.5-9 | 17.8 |
Ø72''x480'' | 3-5 | 2-6 | <=800 | 18 | 5-12 | 25 |
Ø88''x480'' | 3-5 | 1.5-6 | <=800 | 18.5 | 6-15 | 33 |
Ø88''x720'' | 3-5 | 1.5-6 | <=800 | 22 | 10-18 | 53.8 |
Ø88''x800'' | 3-5 | 1.5-6 | <=800 | 30 | 12-20 | 56 |
Ø96''x800'' | 3-5 | 1.5-5 | <=800 | 37 | 18-30 | 60 |
Ø120''x800'' | 3-5 | 1.5-5 | <=800 | 55 | 25-35 | 78 |
Ø120''x1000'' | 3-5 | 1.5-5 | <=800 | 75 | 32-40 | 104.9 |
Different views of dryer:
Before sales: Guide customer to choose the most suitable type of equipments; provide advanced, energy-saving and practical flow chart as well as responsible for designing the whole schem.
On sales: Inspect the product seriously before out of the factory; Invite customer for commissioning in the spot and raising the objection:Organize to delivery according to the contract.
After sales: Company can send technical persons for guiding to install ,debugg and train the workers.We will provide one-year warranty to make sure your machine work well. We have spare parts of the very machine in stock all the time which means the replacements can be sent to you timely.
Zhengzhou Huahong mechanical equipment Co., Ltd is specialized in heavy equipment like various crushers, magnetic separators, mining machines, bricks and blocks machines, cement production line, AAC block line, etc., which is located in the middle of China. Our competitive price, high quality products and excellent after-sales service had gain us good reputation in this field.
Certification:
If you are interested in our products, please contact me!