High quality small wood dryer machine,sawdust rotary dryer,wood chip dryer
1:Brief introduction of small wood dryer
(1) In the scheme of design, fully considering the grain high moisture content, big viscosity, brewers dryer adopt a series of original unique technology and process to solve those problem to ensure good drying
effect.
(2) Rotary drum body use Q345B steel plate. This steel plate will not deformation in high temperature, so the cylinder is very durable. Dryer accessories also use Q345B steel. Big ring gear is made according to Chinese standard casting. Small gear, after forging refinement, can ensure continuous operation of the dryer
2:Working principle of wood dryer
[1]Wet brewers grain are conveyed by belt conveyor to hopper, after the hopper go through feeder enter into
the dryer cylinder.
[2] When brewers grain are fed into the dryer cylinder, it flows down as a result of gravity. Meanwhile, they
are raise by raising plate repetitively.
[3] Then water will be separated from the brewers by dryer hot
air-flow and changed into vapour to be discharged into the atmosphere.
Note:
Raising plate's function are take material to the air then get down and scatter the materials, which make the
material and the airflow contact area increases, thus can improve the drying rate and promote the materials go
forward.
3.Wood dryer specifications:
Model (mm) | Obliquity(%) | Rotation speed (r/min) | Feeding temperature (degree) | Power (kw) | Capacity(t/h) | Weight (t) |
Ø600x6000 | 3-5 | 3-8 | <=700 | 3 | 0.5-1.5 | 2.9 |
Ø800x8000 | 3-5 | 3-8 | <=700 | 4 | 0.8-2.0 | 3.5 |
Ø800x10000 | 3-5 | 3-8 | <=700 | 4 | 0.8-2.5 | 4.5 |
Ø1000x10000 | 3-5 | 3-8 | <=700 | 5.5 | 1.0-3.5 | 5.6 |
Ø1200x10000 | 3-5 | 3-8 | <=700 | 7.5 | 1.8-5 | 14.5 |
Ø1200x12000 | 3-5 | 3-8 | <=700 | 11 | 2-6 | 14.8 |
Ø1500x12000 | 3-5 | 2-6 | <=800 | 15 | 3.5-9 | 17.8 |
Ø1800x12000 | 3-5 | 2-6 | <=800 | 18 | 5-12 | 25 |
Ø2200x12000 | 3-5 | 1.5-6 | <=800 | 18.5 | 6-15 | 33 |
Ø2200x18000 | 3-5 | 1.5-6 | <=800 | 22 | 10-18 | 53.8 |
Ø2200x20000 | 3-5 | 1.5-6 | <=800 | 30 | 12-20 | 56 |
Ø2400x20000 | 3-5 | 1.5-5 | <=800 | 37 | 18-30 | 60 |
Ø3000x20000 | 3-5 | 1.5-5 | <=800 | 55 | 25-35 | 78 |
Ø3000x25000 | 3-5 | 1.5-5 | <=800 | 75 | 32-40 | 104.9 |
4.Wood dryer equipment flow
5:Service standards of our factory:
Pre-sale:
(1) device model choice.
(2) According to customer's special requirements, design and manufacture of products.
(3) training technical personnel for clients.
(4) the company free of charge to the user on-site engineering and technical personnel planning site for the user
to design the best processes and programs.
Sale:
(1) product acceptance.
(2) to help customers develop construction programs.
After-sale:
(1) free to assign a dedicated service personnel, arrived at the scene and guide customers installation.
(2) equipment installation.
(3) on-site training of operators.
(4) complete sets of equipment installed, 1-2 full-time technical staff to stay free of charge to help customers
on-site production of 1 month, until the user satisfaction.
6.The workshop of our factory
Kindly Note:
Please pay attention to the capacity and moisture. It's what you must take into consideration in
choosing a suitable machine.