LPG/GLP Forklift with Nissan Motor
USD $5,000 - $20,000 /Set
Min.Order:1 Set
Shandong Brother International Trading Co., Ltd.
LPG/GLP Forklift with Nissan motor
1 | Model | FY35 | ||||
2 | Power Type | Gasoline/LPG | ||||
3 | Rated Capacity | kg | 3500 | |||
4 | Load Centre | mm | 500 | |||
Characteristic&Dimension | 5 | Lift Height | mm | 3000 | ||
6 | Free lift height | mm | 130 | |||
7 | Fork Size | L×W×T | mm | 1070×125×50 | ||
8 | Mast Tilt Angle | F/R | Deg | 6°/12° | ||
9 | Front Overhang (Wheel center to fork face) | mm | 500 | |||
10 | Rear overhang | mm | 500 | |||
11 | Ground Clearance(Bottom of mast) | mm | 140 | |||
12 | Overall Dimension | Length to face of fork(Without fork) | mm | 2700 | ||
13 | Overall Width | mm | 1225 | |||
14 | Mast Lowered Height | mm | 2045 | |||
15 | Mast Extended Height(With backrest) | mm | 4150 | |||
16 | Overhead Guard Height | mm | 2090 | |||
17 | Turning Radius (outside) | mm | 2415 | |||
18 | Min. right angle asisle width | mm | 2120 | |||
Performance | 19 | Speed | Travel (No load) | km/h | 20 | |
20 | Lifting (Full load) | mm/s | 470 | |||
21 | Lowering(Full load) | mm/s | 450 | |||
22 | Max.Drawbar Pull(Full load) | kn | 18 | |||
23 | Max.Gradeability (No load/Full load) | % | 20 | |||
Chassis | 24 | Tire | Front | mm | 28×9-15-12PR | |
25 | Rear | mm | 6.50-10-10PR | |||
26 | Tread | Front | mm | 1000 | ||
27 | Rear | mm | 980 | |||
28 | Wheelbase | mm | 1700 | |||
29 | Self weight | kg | 4390 | |||
Power&Transmission | 30 | Battery | Voltage/Capacity | V/Ah | 12/90 | |
31 | Engine | Model | K25 | |||
32 | Manufacture | NISSAN | ||||
33 | Rated output/r.p.m. | kw | 44/2500 | |||
34 | Rated torque/r.p.m. | N·m | 186.2/1600 | |||
35 | No.of Cylinder | 4 | ||||
36 | Bore×Stroke | mm | 92×93 | |||
37 | Displacement | cc | 2472 | |||
38 | Fuel Tank Capacity | L | 70 | |||
39 | Transmission | Type | Powershift | |||
40 | Stage | FWD/RVS | 1/1 |