Specifications

1.Digital intelligent driving control system
2.Hydraulic steering system
3.Big arch design
4.low noise & low oil consumption.

CPCD30 Diesel Forklift Truck

 

Main features:

Digital intelligent driving control system can facilitate obtaining the operation data of forklift so as to achieve the whole-process control.

Full hydraulic steering system, can greatly reduce the fatigue of operator, uses crank sliding piece steering and compact structure.

Big arch design on top of the ballast can improve the visibility of rear view; can guarantee the optimum visibility when drive reverses within fixed distance.

The engine hood can open by 90°, and can be effectively supported with air spring so as to facilitate the inspection and maintenance.

The gantry rail section design will be optimized; the interior width is enlarged so that the driver can enjoy a wide scope of eyesight.

The engine has good performance; it has virtues in operation in stability, low noise, low vibration and low consumption.

 

 

Technical Specifications:

 

 

 

Model			Unit	CPC30
Power type			-	Diesel
Rated capacity			kg	3000
Load center			mm	500
Lift height			mm	3000
Free lift height			mm	165
Mast tilt angle(forward /backward)			.	6/12
Lift speed (with/without)			Mm/s	400/440
Travel speed (with/without)			Mm/s	18/19
Max grade ability (with load)			%	20
Minimum turning radius			mm	2410
Overall length (without forks)			mm	3510
Overall width			mm	1995
Full height (door frame no lift)			mm	2770
Wheel base			mm	1700
Tire type			Front	28×9-15-14PR
			back	6.5-10-10PR
Brake type			Travel Brake	hydraulic-foot pedal
			Parking brake	Mechanical-Hand level
Weight			Kg	4250
Battery	Voltage		V	12
	Capacity		Ah	100