Product Details

Specifications

2.4G aire mouse remote gyro mouse for smart tv presenter :
1.2 kinds
2.remote 10m
3.for computer,projector,smart tv

2.4G aire mouse remote 2.4G aire mouse remote gyro mouse for smart tv presenter

1. Product introduction

This wireless air mouse is with built-in gyroscope and the world's best gravity acceleration sensor, It can realize the traditional remote control, mouse, keyboard, bidirectional voice, and the function of motion sensing game on android platform.

It could have you released from your computer/TVset-top boxes/projector and other entertainment equipment, only need to flex your wrist

Compared with traditional usb mouse:

Air mouse	Usb mouse
remote	static
can be with voicer	not
motion sensor	not
gros built -in	not

Plug and play micro receiver, compatible with USB1.1 and USB2.0;

Product parameters

transport	2.4G Radio frequency hopping technology
Effective distance	10 meters
Function of remote control	Android System keys
The mouse function	6 axis gyro sensor
size	1435214.5mm
battery	2 triple A batteries
Standby time	12 months
Working current	The normal version: work: 12 ma dormancy: 30 ua Voice version: the mouse: 15 ma, voice: 35 ma dormancy 3 ua
The receiver	USB 2.0
System requirements	Windows, Android, Linux,

2. Product categories

2.1 Normal version(G62A)

Function:

The wireless mouse/keyboard
Contains the function of motion sensing game (The host must also support)

Features:

6 axis of gyroscope, real-time position calibration of the movement.
Low power consumption: 12 mA (working), 20 uA (hibernation)
The distance: > 20 meters

2.2 Phonetic version(G62C)

Function:

1. Support all the functions of the ordinary version

2.Support voice input and output(mic)

Features:

1.In the movement of six axis of gyroscope, real-time calibration.

2. The recording circuit with the function of automatic gain, can also be clearly recorded in a long distance

3. Output rich voice, especially hitting bass

4. Low power consumption:

State of the mouse :~15mA
bidirectional voice :~35mA
hibernation : ~3uA

3. The specification of functional key

Both sides of the product, total 3 buttons.

3.2.1 two buttons on the left, respectively "volume +" and "volume -"

3.2.2 one button on the right, we call "customize" button

[Non-voice version]:shutdown; short time pressing the key enter standby state, long time pressing close the host.

[Voice version]:Short time pressing switch to audio output mode, pressing 2 seconds is the same as above.

3.3The back

Press "Fn" and the key with orange character simultaneously, you can input the corresponding orange characters .

For example , "Fn" + "Q" input "1"

[ note ] : Except the side buttons. only the button back to the ground is effective.

4. LED Light:

This mouse has a red and a blue LED light. Simply speaking,

The red light blinks constantly :irregular operating.

The blue light is on : normal operating.

4.1 the Led light problems :

a) red light flash fast: Disconnected with the wireless receiver.

b) red light flash slow: Low voltage.

c) red light is on continuously:put the handle on the desktop

horizontally, keep 2-3 seconds until the red light flashes.

d) blue light is on continuously:Some button has being pressed down.

4.2 The normal work

a) Flashing every 5 seconds, but didn't open voice.

b) If blinking faster than a), there are several kinds of state,

means : record or output voice

[Note]:If there is LED lights in the back of the controller ,the function of

the lights in the back contain all the function of red lights and blue lights,

if the frequency is faster than 1hz ,then there is a problem.

5. The code

Mouse and receiver matched(factory)===>customer===>plug receiver into set-top tv boxes ===>automatic connect===>press key(blue light on)===>work

disconnected(wrong operation),red led light will flashing to the receiver

Solve it :

1.Plug the receiver into the USB socket of set-top box (computer, etc.)

2.switch to the state of keyboard, air mouse close to the receiver within 10 cm,

3.Press about 5 seconds , after the success of the code, press any key , the blue light will be on.

6. voice

6.1 The features

The function of voice input and output is open/closed automatically.

If the host record, the recording of handle will open automatically. if the host closed the tape, then the handle will also close the recording module, meanwhile, if the host's voice switch to the air mouse, it can hear the sound immediately.

6.2 Channel switching

6.2.1The default mode

Plug the receiver into the host, voice won't been switched to the air mouse side automatically. it can only switch to the air mouse side after pressing the switch key .

6.2.2Switching method

If users need switch voice into the air mouse side, only need press the custom" in the side. Press it again back to the external host.

6.3 The microphone

6.3.1. It has a built-in microphone circuit with the function of hardware automatic gain, In other words, people's normal voice can be clearly recorded, even in 2-3 meters.

6.3.2Voice version under the normal work, the microphone channel is ready in any time. voice search or recording could be made at any time as long as open the corresponding program on the host .

7. note

In order to avoid the interference from the mouse motion, this product will shut down the mouse function automatically when the keyboard face up. vice versa.