Specifications

stepper motor driver
size:42.3mm*42.3mm*14.5mm
0-2A adjustable current
10-35V input voltage
can integrate with motor

stepper motor driver

 

 

Optically Isolated Input Interface

UIM240xx controllers’ logic control inputs are all optically isolated. All opto-couplers share

one common anode (Vcc) as shown in above schematic diagram. Typically, Vcc is 5V.

However, 3.3V or voltages higher than 5V are also acceptable, so long as the current

through the opto-coupler’s emitter is between 5~20mA.

 

 

 

 

Automatic Current Reduction

UIM240XX controller is featured of Auto Current Reduction. If this function is enabled,
when the motor stops running, the phase current will be cut to 30% of the set value. As
soon as the motor goes back to working, the current will go back to the set value. This
function is enabled by turn the DIP1 (figure 0-4) to the ON position.