heavy duty 1.8m good quality silver galvanized steel cattle corral panels
USD $16 - $32 /Piece
Min.Order:50 Pieces
Anping Hepeng Hardware Netting Co., Ltd.
1. used corral panels Specification popular in AU
-1 8m high with 6 bars/rails or 1.6m high with 5 bars/rails.
-Complete with Caps & Foot plates.
-Holes for ground pin on one leg of each panel.
-2 joining pins supplied of each panel
1> round tube style
material | pre hot dipped galvanized steel pipe |
finishing(zinc coating) | more than 15 microns |
Height x Length | 1800mm x 2100mm |
vertical pipe | 32mm O.D x1.6mm thickness 42mm O.D x 1.6 mm thickness |
horizontal rails | 32mm O.D x1.6mm thickness 42mm O.D X 1.6mm thickness (6 round rails) |
Welding | Fully welded post brackets |
welds | bull bars are fully welded, each weld is protected with epoxy paint |
2> square tube style
material | pre hot dipped galvanized steel pipe |
finishing(zinc coating) | mor than 15 microns |
HeightxLength | 1800mm x 2100mm |
vertical pipe | 50 x 50mm RHS x 1.6mm thickness 40 x 40mm RHS x 1.6mm thickness |
horizontal rails | 50 x 50mm RHS x 1.6mm thickness 40 x 40mm RHS x 1.6mm thickness (6 square rails) |
Welding | Fully welded post brackets |
welds | bull bars are fully welded, each weld is protected with epoxy paint |
3> oval tube style
material | pre hot dipped galvanized steel pipe |
finishing(zinc coating) | mor than 15 microns |
HeightxLength | 1800mm x 2100mm |
vertical pipe | 50 x 50mm RHS x 1.6mm thickness 40 x 40mm RHS x 1.6mm thickness |
horizontal rails | 30x60mm oval rail x 1.6mm thickness 40x80mm oval rail x 1.6mm thickness 40x120mm oval rail x 1.6mm thickness (6 oval rails) |
Welding | Fully welded post brackets |
welds | bull bars are fully welded, each weld is protected with epoxy paint |
Gate For cattle
Height of gate | 7' |
width of gate | 10' |
wide of opening | 7' |
surface treatment | per-galvanized & powder coated & hot dipped galvanized |
For horse
Height of gate | 9' |
width of gate | 12' |
wide of opening | 6’ |
surface treatment | per-galvanized & powder coated & hot dipped galvanized |
used corral panels process
Welded craft:
a. hot dip galvanized tubes
b. welded together
c. welding spots polishing
d. spots antirusting paint
e. spots silver paint or powder coated
3. used corral panels Feature
1>Portable: easy fast to handle (set up, remove and put down), makes the fence panel very
flexible.
2>Robust: interlocking system makes the fence very stable;
quality steel and fully welding makes the panel more stronger; heavy duty and anti-broken;
high zinc or PVC coated make the fence durable
3>Environment Protection: connection with welded to bracket lugs and joining pins, no need to
dig holes or lay foundations. And it benefit grassland protection.
4>Livestock Protection: no sharp edge, very smooth welding spot finihment.
5>Cost-effective: give your corral years of service and minimal maintenance at a low initial cost
Due to the rudely loading, Hepeng Fence extremely strict with the requirement of packaging. Most of the fence factorys are always shipping the products in bulk because of the cost. In fact, it increases the client's unloading labor costs at the destination port. After several manual handlings, it will damage the surface of the fence, even rust and deformation. With stricter requirements of packing, Hepeng Fence takes the triple packaging of all our products.
STEP-1: Carton Box Covered: It can prevent the damage from the bump caused by shipping.
STEP-2: Plastic Film Wrapped: It can keep the product from the rain and moisture immersion.
STEP-3: Steel Pallet loading: All the fence export from Hepeng are equipped with pallets, loading and unloading by the forklift, avoiding the scratch and deformation by the manual handlings in bulk.
Even if you are on the other side of the world, the shipping container through two-month voyage, we promise you will get the brand new fence products!!!
-Our Certification-
1--Wide ranges of products are available for different styles and sizes.
2--Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours. They could also offer professional advices to meet your satisfactory.
3--Friendly Customer Service:
a.We would confirm every details with you before production to avoid any mistake
b.Our experienced QC will follow up the orders to ensure quality
c.Our sales will update you order and shipping status until you get them smoothly
4--Quality Control:Our QC will check products pc by pc before packing.
5--Timely Delivery:We always send out containers within agreed time.
6--Guarantee:We are guarantee to replace or refund any wrong or broken products that caused in our part.
FREQUENTLY ASK QUESTIONS:
Anping Hepeng Hardware Mesh Industry Co.,Ltd.
Established: 1996 Area: 20000 square meter Staff: 256
Main Export Market: Poland, Russia, Canada, French, England, Hungary, Australia, New Zealand, Ukraine, The USA, Mexico, The South Africa, and the South American, etc.
Main Products: Wire mesh fence, temporary fence, crowd control barrier, garden fence, 358 fence, fence post.
Reback