ISO15693 access control rfid HF reader
Negotiable /Set
Min.Order:1 Set
ISO15693 library access control rfid HF device for shelf rfid management system
RFID HF tag Mid Distance Reader Writer high identification ( 2 Antenna Port) desktop reader
RFID HF Tag Reader Writer High Identification Rate ISO15693 RS232
rfid shelf management book tracking system with software solution
l Self-intellectual property;
l Support mainstream ISO15693 protocol tag (TI, PHILIPS, ST, INFINEON, FUJITSU, EM…);
l RF output power over 4W;
l Advanced anti-collision algorithm. High identification rate with tag processing speed 80pcs/s);
l SMA RF interface to support standard 50ohm RFID antenna. Reading distance up to 120cm;
l Support TRANSPARENT COMMAND and SCAN-MODE;
l Support optional DPPM and WPPM;
l Support multiple readers network;
l Low power dissipation;
l Provide DLL and demonstration software to facilitate development.
l Electrical and Mechanical Specification
Under TA=25°C,VCC=+12.6V unless specified
ITEM | SYMBOL | MIN | TYP | MAX | UNIT | |
Power Supply | VCC | 11.6 | 12.6 | 15 | V | |
Current Dissipation | IC |
| 0.8 | 1.2 | A | |
Frequency | FREQ |
| 13.56 |
| MHz | |
Effective Distance* | DIS | 0 | 900 | 1000 | mm | |
G_IN1 Input Level | VIH VIL | 3.5 | 2.6 2.3 |
1.55 | V V | |
G_OUT1, G_OUT2 Output Current | ±IO |
|
| 5 | mA | |
G_OUT1,G_OUT2 Output Level | VOH(IO=-5mA) VOL(IO=5mA) | 3.95 |
|
0.73 | V
| |
Relay | Rated Load | CLOAD |
|
| 0.5A at 125VAC 1A at 24VDC |
|
Operating Voltage |
|
|
| 125VAC 60VDC | V | |
Operating Current |
|
|
| 1 | A | |
Size | L x W x H |
| 215 x 138 x 39 |
| mm |
*Effective distance depends on antenna, tag and working environment.