Name: four antenna port industrial uhf rfid reader
Brand: Chafon
Availability: InStock

Product Details

four antenna port industrial uhf rfid reader

Product Description

CF-RU5400 is a high performance UHF RFID fixed reader. It is designed upon fully self-intellectual property. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, anti-counterfeit and industrial production process control system.

Features

1. Self-intellectual property;

2. Support ISO18000-6C(EPC C1G2) , ISO18000-6B protocol tag;

3. 865~868MHz,902~928MHz frequency band(frequency customization optional);

4. FHSS or Fix Frequency transmission;

5. RF output power up to 30dbm(adjustable);

6. 4 TNC antenna port;

7. Support auto-running, answer and trigger work mode;

8. Low power dissipation with single +9 DC power supply;

9. Support RS232, RS485, TCPIP with other interface optional;

10. Built-in LED, Buzzer, GPIO and Relay;

11. High reliability design.

Parameter

1.Absolute Maximum Rating

ITEM	SYMBOL	VALUE	UNIT
Power Supply	VCC	16	V
Operating Temp.	TOPR	-10~+55	°C
Storage Temp.	TSTR	-20~+75	°C

2.Electrical and Mechanical Specification

Under TA=25°C,VCC=+9V unless specified

ITEM	SYMBOL	MIN	TYP	MAX	UNIT
Power Supply	VCC	8	9	12	V
Current Dissipation	IC		600	1500	mA
Frequency	FREQ	902		928	MHz
Size	Size		160x186x50		mm

3.Interface

1.Power (DC JACK)

No.	Symbol	Comment
Central	PWR	+9VDC
Outer	GND	Ground

2.GPIO (DB15 Female)

No.	Symbol	Comment
1	Output1	General Output1
2	Output2	General Output2
3	Output3	General Output3
4	Output4	General Output4
5	Output5	General Output5
6	Output6	General Output6
7	Output7	General Output7
8	Output8	General Output8
9	TGIN	Trigger input with internal pull-up to 5V through a 10k resistor
10	R+	R+ of RS485
11	R-	R- of RS485
12	GND	Signal Ground
13	NO	Normal-Open terminal of internal relay
14	NC	Normal-Close terminal of internal relay
15	CM	Common terminal of internal relay

3.Serial communication port RS232 (DB9 Male)

No.	Symbol	Comment
1	nc	Reserved
2	TXD	General Output2
3	RXD	General Output3
4	nc	Reserved
5	GND	Ground
6	nc	Reserved
7	nc	Reserved
8	nc	Reserved
9	nc	Reserved

4.TCPIP network (RJ45)

5.TNC antenna port ANT1~ANT4

6.LED indicator LED1~LED7

No.	Symbol	Comment
1	LED1	Antenna 1 active indicator
2	LED2	Antenna 2 active indicator
3	LED3	Antenna 3 active indicator
4	LED4	Antenna 4 active indicator
5	LED5	Tag-detected indicator
6	LED6	Command-executing indicator
7	LED7	Power-on indicator

Application

Warehouse,inventory management,logistics, access control, anti-counterfeit and industrial production process control system etc

You can use the reader connect with four 7dBi antennas,then place two antennas at both size of lair door,when animals pass in and out the door,the tags will be read.

Other Support

1.Comes with completed English SDK,demo software,source code and user manual,it can help you do application software developing. 2.When you buy this reader,we will provide you some sample cards or different tags to help you do testing.

More information about this product,please visit follow link:

CF-RU5400: /productdetails.aspx?pid=381

UHF compatible antenna: /productdetails.aspx?pid=416