program the information into tags rfid uhf desktop reader
CF-RU5202 is a high performance UHF RFID reader. It is designed upon dedicated RFID Engine ASIC with fully self-intellectual property. Based on proprietory efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, anti-counterfeit and industrial production process control system.
Features
Self-intellectual property;
Support ISO18000-6C(EPC C1G2) protocol tag;
902~928MHz or 865~868MHz frequency band(frequency customization optional);
FHSS or Fix Frequency transmission
Multiple tag anti-collision>50pcs/s;
Multiple tag inventory speed>50pcs/s;
Tag buffer size: 370PCS @ Max.128bitsEPC or 120PCS @ Max.496bitsEPC;
Low power dissipation with USB power source or external single +9 DC power supply;
Support RSSI;
Support 2 GPIO;
Support USB (VSP mode), RS232 and USB HID (keyboard emulation)
High reliability design without extra heat-sinking measure;
Support on-the-site firmware upgrading.
MECHANICAL DATA(UNIT mm)
CHARACTERISTICS
Absolute Maximum Rating
ITEM | SYMBOL | VALUE | UNIT |
Power Supply | VCC (USB power source) | 6 | V |
VCC(External power source) | 12 | ||
Operating Temp. | TOPR | -10~+70 | ℃ |
Storage Temp. | TSTR | -20~+85 | ℃ |
Electrical Specification
ITEM | SYMBOL | MIN | TYP | MAX | UNIT |
Power Supply | VCC (USB powered) | 4.5 | 5 | 5.5 | V |
VCC (External supply) | 7 | 9 | 12 | V | |
Current dissipation | IC |
| 180 | 200 | mA |
Frequency* | FREQ | 902 |
| 928 | MHz |
RF power | PRF | 0 |
| 26 | dBm |
RF power Accuracy | AP |
| +/-1 |
| dB |
RF power Flatness | FP |
| +/-0.2 |
| dB |
Receiving Sensitivity | SR |
| -70 |
| dBm |
Size | L×W×H |
| 122.4*84*20 |
| mm |
INTERFACE
1. Socket Definition
No. | Symbol | Comment |
1 | VCC | External +9V power supply |
2 | GND | Ground |
3 | TXD | RS-232 serial data output |
4 | RXD | RS-232 serial data input |
5 | GND | Ground |
6 | GPIO1 | GPIO1 or Wiegand Data 0 |
7 | GPIO2 | GPIO2 or Wiegand Data 1 |
8 | GND | Ground |
1. Switch Definition
| | ||
No. | Symbol | Comment |
1 | SEL_USB | Switch on to enable USB interface |
2 | SEL_USB | |
3 | SEL_RS232 | Switch on to enable RS232 interface |
4 | SEL_RS232 | |
Reader&writer, we will provide SDK, demo software and user manual, you can use the demo software to read&write.
The more related product please check: /product.aspx?cid=252