Product Details

with four antenna port,with sample cards,provide SDK,demo software,user manual 4-channel uhf reader rfid

Product Description

CF-RU5400 is a high performance UHF RFID fixed reader. It is designed upon fully self-intellectual property. Based on proprietory efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, anti-counterfeit and industrial production process control system.

Features

1. Self-intellectual property;

2. Support ISO18000-6C(EPC C1G2) , ISO18000-6B protocol tag;

3. 865~868MHz,902~928MHz frequency band(frequency customization optional);

4. FHSS or Fix Frequency transmission;

5. RF output power up to 30dbm(adjustable);

6. 4 TNC antenna port;

7. Support auto-running, answer and trigger work mode;

8. Low power dissipation with single +9 DC power supply;

9. Support RS232, RS485, TCPIP with other interface optional;

10. Built-in LED, Buzzer, GPIO and Relay;

11. High reliability design.

Parameter

1.Absolute Maximum Rating

ITEM	SYMBOL	VALUE	UNIT
Power Supply	VCC	16	V
Operating Temp.	TOPR	-10~+55	°C
Storage Temp.	TSTR	-20~+75	°C

2.Electrical and Mechanical Specification

Under TA=25°C,VCC=+9V unless specified

ITEM	SYMBOL	MIN	TYP	MAX	UNIT
Power Supply	VCC	8	9	12	V
Current Dissipation	IC		600	1500	mA
Frequency	FREQ	902		928	MHz
Size	Size		160x186x50		mm

3.Interface

1.Power (DC JACK)

No.	Symbol	Comment
Central	PWR	+9VDC
Outer	GND	Ground

2.GPIO (DB15 Female)

No.	Symbol	Comment
1	Output1	General Output1
2	Output2	General Output2
3	Output3	General Output3
4	Output4	General Output4
5	Output5	General Output5
6	Output6	General Output6
7	Output7	General Output7
8	Output8	General Output8
9	TGIN	Trigger input with internal pull-up to 5V through a 10k resistor
10	R+	R+ of RS485
11	R-	R- of RS485
12	GND	Signal Ground
13	NO	Normal-Open terminal of internal relay
14	NC	Normal-Close terminal of internal relay
15	CM	Common terminal of internal relay

3.Serial communication port RS232 (DB9 Male)

No.	Symbol	Comment
1	nc	Reserved
2	TXD	General Output2
3	RXD	General Output3
4	nc	Reserved
5	GND	Ground
6	nc	Reserved
7	nc	Reserved
8	nc	Reserved
9	nc	Reserved

4.TCPIP network (RJ45)

5.TNC antenna port ANT1~ANT4

6.LED indicator LED1~LED7

No.	Symbol	Comment
1	LED1	Antenna 1 active indicator
2	LED2	Antenna 2 active indicator
3	LED3	Antenna 3 active indicator
4	LED4	Antenna 4 active indicator
5	LED5	Tag-detected indicator
6	LED6	Command-executing indicator
7	LED7	Power-on indicator