Name: Hand held outdoor rfid wristband reader for sale
Brand: Chafon
Availability: InStock

Product Details

Hand held outdoor rfid wristband reader for sale

Product Description

Weight	480g
Dimension	138 x 66 x 31mm(Thin: 31, Thick: 34)
charging and discharging parameter	Input	5.0±0.25V DC
	output	5.0±0.25V DC
	nominal capacity	3000mAhlithium polymer battery (>500 charge cycles)
	Standard Charge Circuit	<1A
	Standard Charging method	CV(constant voltage5.0V)charging
	charging time	≤6 hours
	max charging current	<1A
	max discharge current	<1A
	end-off voltage	3.3V
Interface	Bluetooth HID & SPP
1D Infrared	Reading Mode	CCD
	Resolution	2500
	Scan Rate	300 scan/sec
	Symbologies	Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E, Codabar, Interleaved 2 of 5, ISBN/ISSN, Code 93, UCC/EAN-128, GS1 Databar,ITF-14
	Precision	≥ 5mil(under the condition of PCS: 0.9,Code 39)
	Scan Distance	Code128(10mil):30mm-285mm; Code39(5mil):90mm-195mm; Code39(10mil):50mm-325mm; EAN-13(10mil):60mm-265mm; EAN-13(15mil):65mm-350mm;
	sensitivity	incline	±65°@0°Roll and 0° Skew
		rotate	±30°@0°Pitch and 0°Skew
		declination	±60°@0°Roll and 0° Pitch
	outdoor scanning	proprietary technology-- able to read the code bar under sun light
	current	maximum current	100mA
		standby current	45mA
RFID(optional)	Frequency	13.56MHz/860-960Mhz
	Reading Mode	reading-writing or auto-induction just for Reading
	Supported Standards	ISO14443A/EPC GEN2
	Working distance	>30mm
	working current	<100mA
	Max Power Dissipation	0.33W
Environment	Operating temperature	0℃~45℃
	Storage Temperature	-10℃~ +45℃
	Humidity	5% - 95% ( Non-condensing )
Clip	LED display	4LED to show charging and discharging active status and electrical quantity:2LED show the working mode of Bar codes and Bluetooth working mode
	Auto charging	Automatically charging without pressing any key when inserting into the interface by USB cable.
	Auto Detect	Automatically detect whether to charge when inserting into the interface by USB cable.
	priority of charge	Priority of charging mobile phone, then charging the internal battery.
	UPS function	When external power supply breaks off, its internal battery with keep charging mobile phone.
	battery overcharge protection	Dual hardware protection: >4.2±0.04V
	Battery over discharge alarm voltage	HW: 2.8±0.1V & SW: <3.3V; Priority to enable software protection
	Output Current Limiting Threshold	≤ 1.2A
	short-circuit protection	HW protection
Standard Configuration		Micro USB Cable
		Left and right buckle
		front buckle (two pieces with different height)
		skid and scratch resistant cloth 2pcs
		Warranty Card
		Certification
		Instruction Book
Options		5V/2A & 5V/1A two separate output high-quality car charger (use cell phone charger for both mobile phone and back splint when indoor, and use car charger when outdoor. The car charger can also charges tablet PC.
		Sling
		AC charger
		Cross Screwdriver
		pocke

Products Display :

Packaging & Shipping

Our Services