Product Details

Fully automatic wire mesh roll welding machine with CE certificate

Product Description

Machine Description

1. This machine is fully automatic to feed wires, weld mesh, cut edge and roll mesh.

2. The raw material is applicable for low-carbon steel wire, galvanizing wire and stainless steel wire.

3. It has advantages of reasonable design, low noise, stable working, easier operation etc.

4. The mesh size is precise and can be set according to customers’ requirements.

5. It adopts sealed &water cooling welding transformers, the scoria can not easily goes in.

Technical Parameters

Model	DP-DNW-1	DP-DNW-2	DP-DNW-3
Wire diameter	0.4-0.65mm	0.65-1.2/1.8mm	1.0-2.2mm
Aperture/pitch	1/4”-1/2”	1/2”-4”	1”-4”
Mesh width	3 feet, 4feet	4 feet, 5 feet	4 feet, 5 feet, 6 feet, 7feet
Motor	2.2kw	2.2kw	2.2kw;4.0kw
Welding speed	Max. 75 rows/min	Max. 120 rows/min	Max. 80 rows/min
Measurement	2.31.31.4m	2.5/2.91.31.4m	2.5/2.91.31.4m
Weight	1.5T	2T, 2.5T	2T, 2.5T, 3T, 3.5T
Transformers	50kva*3	60kva4;60kva5	60kva*4/5/6/7

Machine Advantages

1. Different button&speed meter design 2. Thick steel plate and square steel

3. Hard welding electrodes 4. Separate control technology

Welded steel wire mesh roll machine factory (Big diameter)

Machine Description

1.Control system: Panasonic (Japan) PLC program, Weinview (Taiwan) touch screen.

2.Wire feeding system: longitude wire from wire coils; cross wire-hopper device with step motor.

3.Cooling system: casting water-cooling transformers.

4.Mesh pulling system: Panasonic (Japan) servo motor for pulling mesh.

5.Patent technology: Brake clutch motor connects the principal axis directly, working stable.

6.Machine material: thick steel plate and profile steel, high strength and toughness.

7.Welding electrodes: pure red copper, can be used 3-6 months.

Technical Parameters

Model	DP-FP-2500BN	Wire diameter	2.5-6mm
Longitude wire space	50-300mm	Cross wire space	Min.50mm
Mesh width	Max.2.5m	Welding speed	45-60 times/min
Longitude wire feeding	From wire coils	Cross wire feeding	Pre-straightened&pre-cut
Welding electrodes	48pcs	Transformers	125kva*6pcs
Machine size	2.93.21.7m	Weight	4500kg

Finished mesh roll

Our Services

Best After-sales Service

1. Guarantee time: one year since machine was at buyer's factory but within 18 months against B/L date.
2. Within guarantee time, if any components are broken under normal condition, we can change for free.
3. We can send our best technician to buyer’s factory for installation, debugging and training.
4. Complete installation instructions, circuit diagram, manual operations and machine layout.
5. Timely reply for your machine questions.