Specifications

1.Shell with aluminum alloy, light weight, compact structure, beautiful shape
2.Installation and use, pollution-free

PSB series of self-type oil-absorbing filter

For oil-absorbing filter, filter the working fluid in solid particles and colloidal substances, effective control of pollution caused by the working fluid.

Installed on the tank top, bottom or side, and the oil-absorbing mouth must be installed below the liquid level in the tank.

Equipped with a self check valve, filter replacement, the fuel tank inside the working fluid does not drain, but also needed a vacuum table assembly and vacuum switching devices such as the sender.

Cartridge filter material were used composite fiber kapok shaping filter paper, stainless steel braid.

Shell with aluminum alloy, light weight, compact structure, beautiful shape.

2, technical parameters

Working medium: mineral oil, emulsion, water - glycol, phosphate ester hydraulic fluid (kapok shape filter paper only applies to mineral oil)

Operating temperature: -25 degrees ~ 110 degrees

Vacuum pressure switch sender: 0.03MPa

 3,

it is recommended flow rate (unit: L / min medium parameters: 30mm2 / s 0.86kg/dm3)

Model	Filter
	FD	FV	CD	CV	MP	MS	MZ	MCD
PSB025…	8	10	8	10	15	20	25	35
PSB040…	13	15	13	15	25	35	40	55
PSB063…	20	23	20	23	40	55	63	85
PSB100…	35	40	35	40	60	80	100	130
PSB160…	50	60	50	60	90	130	160	200
PSB250…	80	100	80	100	150	200	250	330
PSB400…	130	150	130	150	230	320	400	500
PSB630…	200	240	200	240	400	550	630	750
PSB800…	250	300	250	300	500	660	800	1000