bottle cooling/warming machine:
PET spray cooling machine/spray cooler/ spray-cooling machine
1.Summary
The bottle warmer/ cooler is applied to PET bottle tea or juice hot filling production line and PET bottle carbonated drink filling production line. For hot filling, It can put down the temperature of hot filling drink to 36-40. For low-temperature filling, it can get up the temperature of low-temperature filling carbonated drink to 36-40 to eliminating the condensed anna water on the external wall of PET bottles, to keeping bottles dry and clean. So convenient to following-up labeling and packing processes.
2.Structure feature:
a. The main is stainless steel frame-board structure
b. The tunnel spraying cleaning is continuous transmission
c. Main drive is frequency conversion and infinite speed, convey by plastic chain net or stainless steel chain net
d. Heat by coiled pipe hot vapor
e. Temperature control adopts PLC control film regulating valve
3.Main technical parameter:
1 | Production Capacity(BPH) | 3000-5000 | 6000-9000 | 10000-15000 | 24000-36000 |
2 | Heating temperature () | 37-45 | 37-45 | 37-45 | 37-45 |
3 | Cooling time( min) | 12-15 | 12-15 | 12-15 | 12-15 |
4 | Linear conveying speed (m/min) | 100-550 | 100-550 | 100-550 | 100-550 |
5 | Width of mesh conveyor (mm) | 1.22 | 1.22 | 1.22 | 1.22 |
6 | Vaport .Pressure (Mpa) | <0.4 | <0.4 | <0.4 | <0.4 |
7 | Vapor consumption(kg/h) | 80 | 120 | 240 | 280 |
8 | Water circulation volum(m3/h) | 6 | 9 | 15 | 28 |
9 | Installed power( kw) | 6 | 7.55 | 8.6 | 18 |
10 | Dimension (LxWXHmm) | 620×1500×1700 | 1580×1500×1700 | 15800X1800×1700 | 22000×800×1700 |
11 | Weight ( KG) | 2500 | 3200 | 4300 | 5600 |
CONTACT: