Brief introduction

BM501(2-cavity) Semi-automatic blow moulding machine is suitable for producing bottles from 50ml-6000ml. It is suitable for various PET/PP/PMMA material  and is widely be applied to produce mineral water, carbonated drink, beverage,medicine, cosmetic,detergent ,oil bottles and lamp covers etc.
A complete production line of BM501(2-cavity) includes: -Blower -Infrared heater -air filter(2pcs) -High pressure air compressor(1.2cbm/3.0Mpa) -Bottle mould(below/ 1L)

-Spare parts

The components of the machine: PLC------------------------------------------------

Pneumatic Components--------------------

Transducer-------------------------------------- Temp. controller Relay----------------------------------------------

Pipe connecting part------------------------ Seals----------------------------------------------
The spare parts for bm501(2-cavity): 1) Infrared light pipe 16pcs 2) Air pipe 5 meters 3) High pressure blowing valve 1pc 4) Fan 2pcs 5) High and low pressure air pipe 2pcs 6) Menu 1pc 7) Voltage regulation 1pc 8) Thermometer 1pc 9) Cylinder repair group 10pcs 10) Seals 2pcs 11) Indicator light 1pc 12) Tools
The features of the machine 1). The machine adopts revolving infrared pre-heat system, it ensures pet performs be heated evenly. 2). The machine uses mechanical-double-arm mould clamping system which ensures the mould be closed tightly even under high pressure and high temperature. 3).The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different pressure requirements for the action and blow, it can provide sufficient and steady high pressure for blowing large irregular shaped bottles 4).Wide -mouth and hot-filling bottles can also be made.

Brief introduction

BM501(2-cavity) Semi-automatic blow moulding machine is suitable for producing bottles from 50ml-6000ml. It is suitable for various PET/PP/PMMA material  and is widely be applied to produce mineral water, carbonated drink, beverage,medicine, cosmetic,detergent ,oil bottles and lamp covers etc.
A complete production line of BM501(2-cavity) includes: -Blower -Infrared heater -air filter(2pcs) -High pressure air compressor(1.2cbm/3.0Mpa) -Bottle mould(below/ 1L)

-Spare parts

The components of the machine: PLC------------------------------------------------

Pneumatic Components--------------------

Transducer-------------------------------------- Temp. controller Relay----------------------------------------------

Pipe connecting part------------------------ Seals----------------------------------------------
The spare parts for bm501(2-cavity): 1) Infrared light pipe 16pcs 2) Air pipe 5 meters 3) High pressure blowing valve 1pc 4) Fan 2pcs 5) High and low pressure air pipe 2pcs 6) Menu 1pc 7) Voltage regulation 1pc 8) Thermometer 1pc 9) Cylinder repair group 10pcs 10) Seals 2pcs 11) Indicator light 1pc 12) Tools
The features of the machine 1). The machine adopts revolving infrared pre-heat system, it ensures pet performs be heated evenly. 2). The machine uses mechanical-double-arm mould clamping system which ensures the mould be closed tightly even under high pressure and high temperature. 3).The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different pressure requirements for the action and blow, it can provide sufficient and steady high pressure for blowing large irregular shaped bottles 4).Wide -mouth and hot-filling bottles can also be made.