2017 New Digital Twin Socket Thermostat for Reptile Snake Lizard Incubator Aquarium Heat Mat Lamp

Description:

This thermostat has two sockets, there are two relays to control the two sockets, if one socket is damaged, the another one can't be influenced. Each socket works indenpendently, and can be on / off concurrently.

Feature:

• Color: As shown on the picture

• Brand new and high quality

• Two sockets

• Controlling/Measuring Range: 0°C ~ +70°C

• Resolution: 0.5 °C

• Accuracy: +/- 1.0 °C

• Rated voltage: AC 85 ~ 242V 50Hz/60Hz

• Maximum load power: 2000W (maximum 1000W per socket)

• Controlling Mode: Heating / Cooling Mode

• HS Temperature higher limit value 1-70 °C

• LS Temperature lower limit value 1-70 °C

• HC Heating/Cooling mode change 00-70

• Note: HC=00(Heating mode); HC=01(Cooling mode); HC=other value(no output).

• Plug Type: AU Standard

• Soket Type: US Standard

• Shell Size: 13.5cm x 8.5 x 4.5cm

• Cable Length: 1m (approx.)

• Probe line length: 1.9m (approx.)

• Protection function: When short circuit occurs, temperature screen shows “Err”, the power automatically cut off.

Operating instructions :

• Firstly press button "SET" for more than 3 seconds, then you can set the value of HS by pressing up or down arrow key.

• Secondly press button "SET", then you can set the value of LS by pressing up or down arrow key.

• Thirdly press button "SET", then you can set the value of HC by pressing up or down arrow key.

• Lastly press button "SET", the thermostat go into working mode.

• Note: the value of HS must be larger than value of LS.