Product Details

2014 Hot sales 3ft USB to Micro USB Factory Cable for Kindle Fire Motorola Xoom/Phones

Description

Unlike a normal USB fastboot cable these cables are wired in a way that compatible Motorola phones recognize as a "factory" programming cable. This allows the phone to power up and be flashed without having a battery in the phone. Depending upon the model of the phone, it may also boot up differently than it does with a normal USB cable. This factory cable are wired in a way that compatible Motorola Xoom /Phones & Amazon Kindle fire. It will bring your device into Fastboot mode and help you restore your ROM and unbricked your devices.

Specification

Boot up your computer to Windows
Turn off the Kindle Fire
Plug cable into Kindle Fire
Plug into USB Port of the computer
The Kindle Fire unit if not on already will have turned on again. Press and Hold the Power button for 20 seconds (past the do you want to turn off prompt). The device will go dark.
Press the power button once and let go.
The device will turn on and it will stop at the Kindle Fire Triangle ( This is in the Fastboot Mode)
If you check your devices, it should say under Android Phone Android ADB Interface
Using Kindle Fire Utility and TWRP Recovery to restore your rom

Don't leave the cable connected to the phone while unattended. Although the cable should not be recognized by the phone for charging purposes, it is supplying operating power to the phone via its USB port (which is not normally the case). If you are using the cable with no battery in the phone, and if your host computer lost power or shut down, your phone would instantly lose power just like a battery pull had happened.
Connect the Micro-B end to the phone first, and then connect the USB A end to the computer. The Micro-B connector is very tiny and we want to make sure it is in the phone straight and seated before you apply power to it by connecting it to the computer. Connecting the Micro-B end first protects your phone and your computer.
When working on the phone with the cable connected and no battery inside, best to go ahead and put the back cover back on so you don't lay it down on something that touches some contacts in the battery compartment. If you're working on a proper (uncluttered) workbench and you're the careful type, this may not be necessary, but better safe than sorry.
Don't plug this cable into any device not designed for it. If plugged into a device not expecting this map you could destroy the device, your computer, or both.
Cable length: about 95cm / 3 ft
It has micro USB male and USB male connector

If you are interested in our product,pls don't hesitate to contact me.