SNS protective mesh, also known as safety netting system. It is widely used in slope reinforcement.
The SNS protective mesh overcomes the inconvenience during the construction, putting the method of modular unit into the installation, which improves the effect of the construction. The SNS protective mesh is made of wire, anchor line and other accessories required.
Features:

• Flexible, local-global connection
• High strength light section steel structure, easy to transportation, open netting structure, favoring the groundwater flow
• Line products with different requirement
• Widely used in some complicated physical characteristic area
• Simple installation
• Easy repair

Application: This product is widely used in the railway, highway, the mine, the water and electricity project, the tourist site, the river course and in the municipal engineering,etc.

TECCO MESH

This is a special slope stabilization system,consist of below components
 
1) High Tensile Strength Wire Mesh
   Wire strength: 256 ksi (1770 N/mm2)
   Wire diameter: 0.125 inch (3mm)
  
   Material: Galfan Wire (95% Zn / 5% Al coating)  
   Coating: 0.41 oz/ft2 min,125g/m2

   Mesh aperture: 3.3"(83mm) x 5.6"(143mm)
   Mesh height: 0.43" (11mm)
   Mesh strength: 150 KN/m

2. Spike Plates
To insure optimal transfer of forces from the mesh to the anchors, a special spike plate has been developed.These plates are placed over the anchor heads and tightened in order to pre-tension the mesh onto the slope.The plates are galvanized and have dimensions of 13.0" x 7.5" x 0.4"(330mm x 190mm x 10mm).

3.Compression Claws
In order to take full advantage of the high tensile strength of the mesh,a special fastener is required to connect the individual mesh
panels together.These claws are hot dipped galvanized and consist of 0.25"(6mm) thick steel spiral.

4.Anchors
The main anchors of the system are installed in a grid typically ranging from 6.6 to 13.1 ft(2.0m to 4.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling.Anchors consist of commercially available steel bars ranging from 1.0 to 1.25"(25 to 32mm).Self-drilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows.

SPIDER MESH                             
Spider slope stabilization system also know as rockfall drapes,spider net,spider rope net.
Components: high strength carbon steel wire sheet,prestressed anchor bar,special anchor backing plate;
Fixed mode: prestressed anchor bar,special anchor backing plate;
Bearing capacity: It is better than all of the current flexible slope stability system;
Design method: Based on the theory of RUVOLUM design system;
Application: Soil slope and rock slope stability reinforcement,various types of boulder rock reinforcement,can also be combined with deep anchorage measures for slip control.
Breaking force: 195-220KN/m
Aperture shape: diamond
Aperture size: 292 x 500mm (+/-5%)
Wire diameter: 3.0mm                                  
Monofilament intensity: Not less than 1770N/mm²
Strands structure: 1 x 3
Zinc mass: Not less than 150g/m²