HEPING brand chain-link fence (also referred to as wire netting, wire-mesh fence, chain-wire fence, cyclone fence, hurricane fence, or diamond-mesh fence) is a type of woven fence usually made from galvanized or LLDPE-coated steel wire. The wires run vertically and are bent into a zig-zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence.

SIZE AND USES:

In the United States, fencing usually comes in 20 rod and 50 ft rolls, which can be joined by "unscrewing" one of the end wires and then "screwing" it back in so that it hooks both pieces. Common heights include 3 ft, 3 ft 6 in, 4 ft, 5 ft, 6 ft, 7 ft, 8 ft, 10 ft, and 12 ft, though almost any height is possible. Common mesh gauges are 9, 11, and 11.5. Mesh length can also vary based on need, with the standard mesh length being 2". For tennis courts and ball parks, the most popular height is 10 ft, and tennis courts use a mesh length of 1.75".^[2]

The popularity of chain-link fence is due to its relatively low cost and ease of installation. A further advantage is that, due to the open weave, chain-link fences are transparent and do not obscure sunlight from either side of the fence. One can make a chain-link fence semi-opaque by inserting slats into the mesh.

Installation :

The installation of chain-link fence involves setting posts into the ground and attaching the fence to them. The posts may be steel tubing, timber or concrete and may be driven into the ground or set in concrete. End, corner or gate posts, commonly referred to as "terminal posts", must be set in concrete footing or otherwise anchored to prevent leaning under the tension of a stretched fence. Posts set between the terminal posts are called "line posts" and are set at intervals not to exceed 10 feet. The installer attaches the fence at one end, stretches it, and attaches at the other, easily removing the excess by "unscrewing" a wire. Finally, the installer ties the fence to the line posts with aluminum wire. In many cases, the installer stretches a bottom tension wire, sometimes referred to as "coil wire", between terminal posts to help minimize the in and out movement that occurs at the bottom of the chain-link mesh between posts. Top horizontal rails are used on most chain-link fences, although not necessary. Bottom rails may be added in lieu of bottom tension wires, and for taller fences, 10 feet or more, intermediate horizontal rails are often added.[3]

Once stretched, a bottom wire should be secured to the line posts and the chain-link mesh "hog ringed" to the tension wire 2' on center. One generally installs this wire before installing the chain-link mesh.

 MANUFACTURING:

The manufacturing of chain-link fencing is called weaving. A metal wire, often galvanized to reduce corrosion, is pulled along a rotating long and flat blade, thus creating a somewhat flattened spiral. The spiral continues to rotate past the blade and winds its way through the previous spiral that is already part of the fence. When the spiral reaches the far end of the fence, the spiral is cut near the blade. Next, the spiral is pressed flat and the entire fence is moved up, ready for the next cycle. The end of every second spiral overlaps the end of every first spiral. The machine clamps both ends and gives them a few twists. This makes the links permanent.

An improved version of the weaving machine winds two wires around the blade at once, thus creating a double helix. One of the spirals is woven through the last spiral that is already part of the fence. This improvement allows the process to advance twice as fast.

 Chain-link fence will be packaged by plastic film or woven bag. Bulk or in Plallet.

 Other  package can be made according to client's requirement.

 Sample is available. And sample can be send by any express delivery company.

1)  Factory price

2)  ISO9001 certified system,

3)  High quanlity production controll,

4)  Low MOQ, fast delivery time,

5)  Sample is for free.

Peaceful Hardware And Mesh Co., Ltd is based in Anping of Hebei Province, the famous Wire Mesh Land of China. Started in 1988, our company has now expanded into a specialized manufacturer and exporter of wire mesh products.

Our company has more than 80 sets production and inspection equipment and a staff of 182 people including 38 professional technicians. Our products are sold well in Southeast Asia, Europe, Arab, Australia, Japan, Brazil, the USA, South Africa and some other parts of the world.

Our major products include: gabion and mattress, chain link fence, fence netting and fence series, SNS fence, chicken wire, concrete reinforcement wire mesh, welded wire mesh, expanded metal mesh, aluminum metal mesh, cattle fence, screen mesh, wire mesh for construction, barbed wire, razor blade wire, steel bar grating, expanded metal deck, monkey ladder, stainless steel glove, star picket, plastic wire mesh and so on.

If you are interested in any of our products, please feel free to contract us. We looking forward to cooperating with you!

"The quality of products is our life", we sincerely hope that we will cooperate with customers abroad and home to develop our promising enterprise.