Product Details

Zinc Coated Steel Welded Wire Mesh Machines for Making Poultry Runs

For a chicken run a 1” x 1” aperture is the largest you should use this will allow vermin through. If you want to keep out all but the

smallest of vermin ½ x ½ or a 1 x ½ aperture should be used. This aperture is also very common for garden fencing to keep out

rabbits.

A ¼ x ¼ mesh is what is used for bird feeders. If you need a smaller aperture you should look at the range of woven wires we

sell.

Classification:

1, Welded before Hot-dipped Galvanized

2, Welded before Electro Galvanized

3, Welded with Electro Galvanized Wire

4, Welded with Cold Galvanized Wire

Technical Parameter

Welded Wire Mesh Machines Parameter

This machine is a wire welded wire mesh machine, the weft wire through the high-speed rotation of the shuttle

weft straightening, diameter wire through the barbed shaft stepper into the grid, this machine simple operation,

easy maintenance, cross welding spot welding firm, welded wire mesh machine is most commonly used

equipment;

JK-DHW-A thin wire No. 0.45-0.85mm

JK-DHW-B thin wire No. 0.6-1.3mm

JK-DHW-C middle wire No. 0.8-1.6mm

JK-DHW-D thick wire No.1.4-2.7mm

Note:1inch=25.4mm(1/2 inch=12.7mm)

1feet=12inches=304.8mm

(4ft=1219.2mm, 5ft=1524mm)

Model		Mesh width		Min mesh	Wire diameter(mm)	Welding speed(mm)	Mesh length(mm)	other
JK-DHW1X1/2-A		1m		1/2”*1/2”	0.45-0.85	90-120	130	1/2”X1” 1”X1/2” 1”X1” 2”X2”
JK-DHW4X1/2-A		4ft
JK-DHW1X1/2-C		1m		1/2”*1/2”	0.6-1.3	90-120	110	1/2”X1” 1”X1/2” 1”X1” 2”X2”
JK-DHW4X1/2-C		4ft
JK-DHW5X1/2-C		5ft
JK-DHW1X1/2-C		1m		1/2”*1/2”	0.8-1.6mm	80-90	100	1/2”X1” 1”X1/2” 1”X1” 2”X2”
JK-DHW4X1/2-C		4ft
JK-DHW5X1/2-C		5ft
JK-DHW6X1/2-C		6ft
JK-DHW1X1-A		1m		1”x1”	0.45-0.85	90-120	130	1”x2” 2”x1” 2”x2” 4”x4”
JK-DHW4X1-A		4ft
JK-DHW1X1-B		1m		1”x1”	0.6-1.3	90-100	110	1”x2” 2”x1” 2”x2” 4”x4”
JK-DHW4X1-B		4ft
JK-DHW5X1-B		5ft
JK-DHW1X1-C	1m		1”x1”		0.8-1.6	90-100	100	1”x2” 2”x1” 2”x2” 4”x4”
JK-DHW4X1-C	4ft
JK-DHW5X1-C	5ft
JK-DHW6X1-C	6ft
JK-DHW1X1-D	1m		1”x1”		1.4-2.6	80-90	80	1”x2” 2”x1” 2”x2” 4”x4”
JK-DHW4X1-D	4ft
JK-DHW5X1-D	5ft
JK-DHW6X1-D	6ft
JK-DHW2X1-D	2m
JK-DHW7X1-D	7ft
L-DHW()X1/4-A	1m-4ft		1/4”(6.35mm)		Refer to the above	90-90	130	1/4”x1/4” 1/2”x1/2”
L-DHW()X2.5/8-A -B	1m-4ft		2.5/8”(7.95mm)		Refer to the above	80-90	130	2.5/8”x2.5/8” 5/8”x5/8”
L-DHW()X5/8-A -B -C	1m-5ft		5/8”(15.9mm)		Refer to the above	70-90	110	5/8”x5/8”
L-DHW()X3/8-A -B	1m-4ft		3/8”(9.252mm)		Refer to the above	80-90	100	3/8”x3/8” 3/4”x3/4”
L-DHW()X3/4-A -B -C	1m-6ft		3/4”(19.05mm) 1.5(38.1mm)		Refer to the above	70-100	80-100	3/4”x3/4” 1.5”x1.5”
L-DHW()X1.5-A -B -C	1m-7ft		3/8”(19.05mm)		Refer to the above	70-100	70-100	Refer to the above
L-DHW()X	Special customized,: user can specify any width and mesh and wire diameter

Finished Products

Welded Wire Mesh Application

What thickness

(0.7mm) is suitable for birdfeeders

(1mm) Is common for cheaper chicken runs and garden fencing

(1.6mm) Is used for good quality chicken runs and vermin protection (2mm) Often used with a 1” aperture for extra strength also used with a 1” x1/2” aperture in parrot fencing.

(2.5mm) This is the most common thickness for dog and perimeter fencing

(3mm) Strong perimeter fencing used in areas of potential vandalism

(3.5mm) This is the thickness of our animal panels

used for security purposes or to add strength on large apertures.

Related Products

1.Wire Mesh Welding Machines JK-RM-2500B for reinforcing mesh or steel bar mesh

wire diameter 5-12mm
mesh width 2.5m
mesh length max 12m
aperture 100-300mm
welding electrode 24pcs
welding transformer 150KVA*12
welding speed: 30-65 cross wires/min

2. Wire Mesh Welding Machines JK-FM-2500S for fence mesh or construction mesh

wire diameter 3-6mm
mesh width 2.5m
mesh length max12m
aperture 50-200mm
welding electrode 48pcs
welding transformer 150KVA*12
welding speed 45-75 cross wires/min
mesh drawing device, powered by Servo motor
line wire: pre-straightened and precut or coil wire
cross wire:pre-straightened and precut
end products: roll mesh or panel mesh

3. Full Automatic Wire Mesh Welding Machine JK-AC-1200S for construction mesh or poultry cage mesh

wire diameter 2-3.5mm
mesh width 1.2m
mesh length as required
aperture 50-200mm as required
welding electrode :16pcs or 25pcs as required
welding speed: 80-90corss wires/min
mesh drawing device, powered by Servo motor
line wire and cross wire: both from coil wire
end products: panel mesh or roll mesh

4. electric welded mesh machines for construction mesh

Wire diameter 0.8-2.0mm
mesh width 1.2-1.8m
mesh length as required
aperture 1/2"-4" as required
welding speed:80-120 cross wire/min
line wire and cross wire: both from coil wire
end products: roll mesh

All our machines could be customized, please contact us for much more details

After-Sales Service

Our company has a sound service system, from customer requirements gathering, pre-sales technical consulting, installation and commissioning in sales, and after sales maintenance of equipment. All of service system only for your satisfaction.

A: Pre-sale service; plant layout design, technical consulting, feasibility studies, cost and ROI analysis;
B: sales services: installation and commissioning, operator training, electrician and mechanic training;
1.Equipment installation and commissioning: assist and guide customer coordinate the equipment layout according to the actual situation, make reasonable arrangements for the overall planing of the installation location. Assigned technician to provide equipment installation, operation, ancillary facilities, production, repair, maintenance services and answer the relevant questions.
2.Training operation and maintenance personnel: our company will provide training of the operation and maintenance personnel according to customer’s requirement.
C: after-sale service; supply spare parts and provide after-sale services
1.supply of spare parts: keep records for each customer, provide long-term supply of spare parts, and send it to customers hand with the fastest speed according to customers’ requirement.
2.Unexpected emergency repair service: once the equipment have malfunction, and the user unable to rule out, we will arrange technician to the user factory in the soonest time, solve the trouble and resume production in time.

Contact info

Tell us your need, we will surprise you with best price, best quality and best service!