Product Details

ribbed steel wire mesh production line

1. Cold formed and ribbed machine

This Cold-rolled ribbed steel bar production line is to roll surface of steel coil round bar to form three crescent sides.
Raw material is hot-rolled low carbon steel round bar.
Usage: This production line mainly rolls ordinary low carbon steel bar or low alloy steel bar with multiple cold rolling and a ribbing rolling, which finally forms reinforcing steel bars with three-side crescent shape ribs.
Process:
Wire rod testing (raw material)–Spool off–Butt-welding–Sheller–Dry Lubrication–Reducing Mill # 1–Horizontal Wire Drawing Machine–# 2 reducing rolling mill rib–Wire spool up machine--testing storage

Model	LZ-30000T	LZ-15000T
Wire diameter	5-14mm	4-12mm
Speed	90-150m/min	0-90m/min
Speed adjustment mode	Frequency control	Frequency control
Motor capacity	90KW+15KW	55KW+7.5kw
Motor frequency inverter	90KW+15KW	55KW+11KW
Wire spool	1T/bundle	1T/bundle
Installation length	24m	12m
Weight	8T	4T

2. wire straightening and cutting machine

Model	GT4-12
Wire diameter	4-12mm rebar
Cutting length	400mm to up
Cutting error	±1cm
Speed	52m/min
Straight &traction motor	11KW
Pump motor	5.5KW
voltage	380V/50HZ/3phase
Straightening degree	±2mm/m
Whole weight	1200kg
Dimension(mm)	29408001100mm
Packing size(mm)	350011001250mm
System	Automatic control system(manual system as backup)
Control box	CNC control box
Functions	Unwinding steel from the coils Straightening steel 3.Cleaning surface of steel 4. Cutting into length(according to the established length)

3.ribbed wire mesh welding machines

Model	JK-FM-2500S+
Wire diameter	4-8mm
Line wire spacing	100-300mm
Cross wire spacing	CNC fine tuning
Cross wire length	Max.2.5m
Line wire length	Unlimited
Welding spot	24 pcs
Wire material type	Pre-straightened and pre-cut, high quality low carbon steel wire, cold-drawn steel wire, cold-rolled ribbed bar with clear surface and without rusting, lime drawing powder, water stain, scabbing--
Welding speed	50-75 cross wires/min
Power mode	Pneumatic system+servo motor+PLC+touch screen
Welding capacity	150KVAX6
Power supply	≥160KVA; ≥175mm² aluminum wire; distance between machines and transformers within100m
Voltage	3-phase 380V/440V/415V220V 50HZ/60HZ or as required
Manpower needed	4-5 persons
Dimension	8.43.41.6m
Weight	5.2T

Contact info