Product Details

Specifications

steel bar mesh
Reinforcing mesh
2>diameter :3.35-12mm
3>materials : low carbon steel wire
4>Australian standard

steel bar mesh

Standard Sizes

Reinforcing mesh is available in rolls (60m x 2,4m) and sheets (6m x 2,4m), manufactured according to standard sizes.
Wire diameters vary from 3,55mm to 12mm. Mesh aperture can be as small as 100mm x 100mm.

Special Mesh

Specialised machinery is used to produce weldmesh with non-standard aperture sizes. The spacing of wires in either
direction is variable between 25mm and 150mm. Customised mesh is available on request according to specifications
provided.

the Reinforcing Mesh Data Sheet
Standard sizes of welded mesh fabric
Specifications: Sheets: 6m x 2,4m or Rolls: 60m x 2,4m

Based on SABS 1024/2006 specifications for welded steel fabric for concrete reinforcement

				SHEETS ONLY												SHEET OR ROLLS											SHEETS ONLY												SHEETSORROLLS
MR Reference number				888		746		617		500		395	311		245			193	100	156			200		1085			943	772		655	517	433	341	289	278		226		133
Mesh Size	Nominal Pitch of Wires	Main mm		200	200		200		200		200		200	200			200		200	100		100		100				100	100	100		100	100	100	100	100		100			100
		Cross mm		200	200		200		200		200		200	200			200		200	100		100		200				200	200	200		200	200	200	200	300		300			300
Wire Sizes		Main mm		12	11		10		9		8		7,1	6,3			5,6		4,0	3,55		4,0		12				11	10	9		8	7,1	6,3	5,6	6,3		5,6			4,0
		Cross mm		12	11		10		9		8		7,1	6,3			5,6		4,0	3,55		4,0		8				8	7,1	7,1		6,3	6,3	5,6	5,6	4,0		4,0			4,0
Cross Sectional Area Per Meter Width		Main mm2		566	475		393		318		251		198	156			123		63	99		126		1131				951	786	636		503	396	312	246	312		246			126
		Cross mm2		566	475		393		318		251		198	156			123		63	99		126		251				251	198	198		156	156	123	123	42		42			42
Nominal Mass per m2		kg		8,88	7,46		6,17		5,00		3,95		3,11	2,45			1,93		1,00	1,56		2,00		10,85				9,43	7,72	6,55		5,17	4,33	3,41	2,89	2,78		2,26			1,33
			SQUARE																		GUNITE					STRUCTURAL											LONGITUDINAL