Description

UV Drying 6 Color High Speed Flexo Plate Making Machine:

Features of UV Drying 6 Color High Speed Flexo Plate Making Machine:

1. Unwind unit 1 set

1. Max unwind diameter-1067mm

2. 3 inch pneumatic shaft-2 sets

3. Pneumatic roll lift device

4. Magnetic tension control system

5. Automatic stop device when paper broken

6. Quick air gun

2,Web guide system -1 set

1. Splicing table and pneumatic paper pressing equipment  1 unit

2. Adopts ball screw electric actuator                

3. Adopts the photoelectric sensor for web guide transmission (used for paper and film both)   

4. Electronic web guide traction device. If there is any excursion in paper feeding, the system will have a constant and accurate adjustment.                   

5. Adopts closed-loop control system to accurately detect the deviation and correct it.   

6. Hard anodization to the paper guide rollers HV800-1000                    

7. Inspection: the edge                    

8. Web guide precision: ±0.02mm

3,Corona system 1 set

4,Infeed tension control 1 set

5. Printing stations 6 or 8 sets

l  6 groups of servo motors driving, designed with thick impression cylinder to stability of printing material and achieve better printing effect.

l  6 groups of servo motors driving anilox rollers, and gears driving plate cylinders.

l  Two ends of the plate cylinder are equipped with a support to reduce vibration caused by plate.

l  Plate cylinder one set totaling6 pieces (print repeated determined by customer)

l  High precision ceramic anilox roll 6 pieces (LPI determined by customer)

l  Horizontal manual register adjustment. Fine adjustment of plate cylinder.

l  Vertical manual register system

l  Single reverse doctor blade can position without adjusting the pressure

l  Anilox and plate cylinder pneumatic clutch control

l  Plate cylinders can be changed without any other tools and without adjusting pressure.

l  Automatic cleaning for printing plates                  

l  Anilox rollers will continue running after the machine stops to prevent the ink from drying

l  Anilox rollers equipped with high precision fine tuning system can make sure the pressure between anilox rollers and also plate cylinders           

l  Dance of anilox, plate cylinder and impression cylinder: ≤0.03mm     

l  Bearings are P5 degrees

6,Hot air drying system 6 sets

1. Hot air and cooling air combination (including blower), the volume of air can be adjusted.

2. Air hose uses South Korea Teflon material.

3. Each printing station has a separate hot air fan to ensure drying quality (6 blowers and 1 suction blower)

Waste air will be out by an exhaust fan

7. UV drying systems 6 sets

l  Brand: Taiwan uvlight

l  Starting power of UV is decided as you desire, to save energy

l  Air hose uses South Korea Teflon material.

Waste air will be out by an exhaust fan

8. Synchronous stroboscope still image inspecting system 1 set

l  Preset the inspecting position horizontally and vertically

l  Zoom the images to have a position inspection

l  Equipped the bracing device and electrical device connector

l  High resolution camera 130*1027 pixel

l  14' Philips colorful image inspector                1 unit   

l  High speed flash lamp                             1 unit  

l  It can magnify 20 times and observe the image with a fixed position to guarantee the printing quality.

9,Outfeed tension control system 1 set

l  Adopts double pressure rubber roll to guarantee stable tension.

l  Controlled by Rexroth servo motor  1 set

l  Rexroth servo motor driver       1 set

10,Rewind unit 1 set

l  Maximum rewind diameter   1024mm

l  Programmable closed-loop controlling roll tension system with magnetic brake

l  3 inch pneumatic shaft   1 set

l  Pneumatic roll lift device

11,Automatic registration system 5 sets

l  The first color group is the benchmark and the behind printing unit registers automatically according to the first color group. The automatic registration controller can adjust the phrase position of the servo motor according to the detected error, realizing the quick registration and improving the operating quality and the extent of automation, so the machine greatly reduces the labor intensity and the attrition rate of raw materials.

l  When host engine stops, it maintain the registration position

l  When host engine runs, it registers automatically

12,Plate mounting machine 1 set

l  It has a screen including the bilateral symmetrical split-screen display                

l  It is used for the plate mounting to realize the purpose of multi-color overprinting.

l  Quickly changes the printing plates

l  Japan-made Sony HD camera can zoom in 50 times

l  1 set of image splitter

13,Auto-lubricating system   1 set

l This unit is adjustable according to the lubricating time and amount. When the system breaks down or falls short of oil, the alarm would work.

14,Special tool kit 1 set

l  1 set of special tools

15.  Anilox roller cleaning machine 1 set

Specifications of UV Drying 6 Color High Speed Flexo Plate Making Machine:

Packaging & Delivery:

The Pictures of Factory and certificate

We can delivery the goods timely after getting your deposit.

Our Advantage:

• Our experience and knowledge of the market
• The products have a history you can trust
• Our competitive prices mean great value for money
• Fine quality as well as low price will help push the sales of your producrs.
• We are proud of our quick response to all enquires, orders and service calls
• Our products are available tationwide

We have a dedicated sales team ready and waiting to speak to you on the telephone for any queries or requirements you have

If you have any problems, Please contact me