Factory price LED display adjustable humidity infant medical incubator neonatal

Model:YSBB-200S

Main functions of baby incubator:

Microprocessor based servo controlled temperature system

Control modes: Air mode and baby skin mode

Humidity is adjustable continuously   

Set temperature, air temperature, baby skin temperature, timer and heating power are displayed separately by LED

Self - testing function, various failure alarms by audible and visual

>37℃ temperature set function  

Triple protection for over temperature with separate cut off device, more safety system

The inclination of infant bed is adjustable 

Single wall hood, 4 operating windows and 2 iris ports

Independent locking device for front door   

RS232 connector, Oxygen inlet   Cabinet with four drawers;  

Standard configuration:

Main body(including the transparent hood, control system, infant bed, water trough), I. V. Pole, mattress, support bracket, castors.

Optional parts:

Phototherapy up side unit.

Phototherapy from up and down sides;

RS232(485)conncector; Tray/pole;

Infant bed pulled from side door

Double wall hood.

Top selling cheap price LED Temperature displayed newborn incubator

Model:YSBB-100T

Function features:

Microprocessor based servo controlled temperature system
Temperature displayed by LED
Alarms functions:
Power failure;
over temperature;
temperature deviation; 
temperature sensor failure;
fan failure;
>37 temperature setting
A keypad lock prevent inadvertent changes the setting 
Humidity is adjustable continuously
Heating power displayed on panel
A second thermal cut-off function for more safety
The infant bed inclination angle is adjustable
Trough for pulling and pushing ,which is convenient to add water and wash  
Fan with low noise and long life-span
Temperature deviation and over temperature could be amended in front panel directly
Silence/reset button for alarms
six operating windows,two sides operating windows can be swiveled
Heater is electrically cut-out if air temperature inside incubator exceed 40
Cupboard for easy storage

Model: YSBB-100S

Main functions for infant incubator:

1.Microprocessor based servo controlled temperature system.

2.Temperature displayed by LED.

3.Alarm functions : Power failure; over temperature; temperature deviation; temperature sensor failure;fan failure;

4.>37°C temperature setting

5. A keypad lock helps prevent inadvertent changes the setting

6. Temperature deviation and over temperature could be amended in front panel directly

7.The infant bed inclination angle is adjustable

8.Humidity is adjustable continuously

9.Integral timer to record therapy time.

10.A second thermal cut-off function for more safety.

Standard configuration of infant incubator:

Main body(including the transparent hood, control system, infant bed, water trough), I. V. Pole, mattress, support bracket, castors.

Optional parts:

Phototherapy up side unit;

Phototherapy from up and down sides;

RS232(485)conncector; Tray/pole;

Infant bed pulled from side door.

Infant bed pulled from side and front door.

Double wall hood.

hospital medical equipment baby incubator for sale price

We provide various equipment for New born baby. One stop shopping baby products, guarantee high quality, competitive price and fast delivery. 

Brief introduction: 
1. Microprocessor based servo controlled temperature system.
2. The microprocessor-controlled unit allows for three settings: pre-warm, manual or automatic.
3. Alarm functions for safety includes: Power failure, temperature deviation, Temperature sensor failure, over

    temperature.

4. APGAR timer to record therapy time                                                                    

5. Convenient X-ray cassette under infant bed                                                        

6. Heater head can be adjusted + 90º horizontally                                                 

7. Tilt angle of infant bed is adjustable                                                                       

8. Halogen Observe light angle is adjustable                                                      

9. Transparent protector folded                                                                                  

10. Adopts anti-explosion micro crystal quartz infrared radiation tube for its radiation source, the heating is quick

      and life-span is long                                                          

11. Alarms are audible and visual                                                               

12. A second thermal cut-out function for more safety                                                                          

13. Skin temperature sensor failure protect function avoid over temperature                             

14. Temperature deviation can be amended in front panel directly

  infant incubater

Standard configuration

Main body (including the radiant source, control system, infant bed, bracket), X-ray cassette , Observe light , I.V.pole, skin temperature sensor, tray, mattress, transparent protector, castors.

Optional parts: Drawer, RS-232(485) connector

Technical data:

1.Power supply : 110/220V   60/50Hz

2. Power input: ≤1200VA

3. Operating condition

An ambient Temperature:18°C-30°C

An ambient Relative Humidity: 30%--75%RH

Atmospheric Pressure: 700~1060 hPa

An ambient Air Velocity<0.3m/s

4. Temperature control: 32°C~38°C

5.Temperature control accuracy: ≤0.5°C

6.Mattress temperature uniformity :<2°C

7.Skin temperature sensor accuracy: +0.3°C

8.Warm-up time: ≤30min

9. Infant bed tilt angle:+ 10°

10.APGAR timer range: ≤24h

11.Heater head horizontal: ±90°

12.Mattress size: 67CM X 54CM

13.Distance from heater to mattress:90CM

Transport and storage

Environment Temperature:-40°C~ +55°C

Environment Relative Humidity: ≤95%

Atmospheric Pressure: 500~1060hPa

Package:

Each unit is packed one case

Size:120CMX 70CM X 96CM

Gross weight: ≤90KG

Infant Phototherapy Unit

Phototherapy is the oldest & almost the only known mode of therapy for neonatal jaundice. Once bilirubin exceeds the accepted level for age, phototherapy must be applied as soon as possible 

toavoid brain damage. Using this new intensive phototherapy device, make it possible to give a 

double phototherapy effect with half costs, and save the costs of lamps & the time of stay of the 

baby .

cheapest  price of baby infant incubator

high quality two grade Humidity cheap hospital incubators baby

incubator baby

Air mode and baby skin mode cheap Neonatal incubator price

Please let us know your specfic request. We would like to recommend you the most suitable model based on your information. 

Contact Person:Iris Chen

Mob:+0086 13826442089 (whatsapp available) 

Skype: ysenmediris