note:the following size is just for you refer , unstandard size is custom-made.

Applications,
temperature and
pressure range: Intended for use with a 97C hose clamp, similar type clamp or a crimped ferrule.
Temperature and working pressure ranges from -40° to +160°F at 150 PSI maximum.
Features: • All Parker hose barb fi tting pipe threads are made to Dryseal standards.
• Machined from CA 360 or CA 345 brass.
Assembly Instructions:
1. Cut hose cleanly and squarely to length.
2. Slide clamp on hose.
3. Lubricate hose. Push hose on fi tting until hose bottoms against stop or hex.
4. Position hose clamp as shown and secure with a screwdriver or wrench. Maintain “A”
dimension noted below for proper clamp positioning.