Product Details

YTO CA702 70hp Agricultural Crawler Tractor

Application Site

This crawler tractor is mainly used for earth-moving operation, if removing the blade, also can be used for plowing and harrowing.

Product Description

♦Crawler bulldozer with high performance price ratio is mainly used for earth-moving operation, if removing the blade, the bulldozer can also be used for plowing and harrowing.

♦Dry-type double-disc single-action main clutch, which is easy to operate and has long service life.

♦4+2 transmission equipped with sliding gear for shifting operation, which has reliable performance and is suitable for various operations.

♦Multiple-disc dry-type steering clutch, and floating-type belt brake which enables reliable braking operation.

♦Freely-supported beam structure for final drive, which has the advantages including high supporting strength and high reliability.

♦Wide crawler available for works on low and wet land, and rubber crawler available for increasing the trafficability.

Technical Parameters

Model	YTO-C702
Overall dimensions L×W×H (mm) (With blade)	4870×2462×2766
Overall dimensions L×W×H (mm) (Without blade)	4466×1835×2766
Operating weight (kg) (Without blade)	6300/6800 (equipped with earth-moving shovel)
Track gauge (mm)	1435
Wheel base (mm)	1622
Track width (mm)	390
Ground pressure (kPa) (With blade)	44.2/47.72 (equipped with earth-moving shovel)
Disel engine
Engine type	LR4B3-22
Type	vertical,water-cooling,four-stroke
Rated power output (kW)	51.5
Rated speed (r/min)	2200
Displacement (L)	4.58
Gearbox
Number of speed gear (forward/reverse)	4/2 sliding gear
Speed range(Km/h) forward/reverse	3.67~9.03/3.51~5.59
PTO shaft power (KW)	44
PTO rotational speed (r/min)	720
Clutch	12-inch double-disc single-action
Working device
Suspension category	Rear-mounted three-point class-II linkage
Tilling depth control	Height adjustment
Lifting force(KN)	12.8
Blade dimensions height ×width(mm)	2462×850
Bulldozing blade depth (mm)	290

Machine Photos

FACTORY LINE

Packaging & Shipping

Truemach Warranty:

We grants our clients a 12 month period or 2000 hours warranty for any machine purchased from us.
During the warranty period,In case the defect of material,design,making,assembly or workmanship has occurred with spare parts in normal operation according to the machine manual.
The defective part will be repaired or replaced free of charge at our discretion.

Service Provided

1) We help customer to choose suitable machine.If you visit us,we can give on-site technical consultation, driver training and

maintenance training in our factory.

2) We make driving test before leaving factory,That makes sure our client use the machine normally.customer will receive machine as “0”hour all new condition.

3) We'll supervising goods ship in to container & take photos for customer.Our powerful shipping agency will offer be

st sea freight fee and responsible for detail treatment to goods.

4) Operation manual in English provided.If you need other language manual,we can provide you based on adding

little cost.

5) We prepare free spare parts in a toolbox for customer for emergency use.

6) We make record for every machine chassis no.and tracing them to get the latest information about the machine.

And give the best service timely.

7) Exclude the guarantee period, you can buy parts from us at moderate cost price. We promise support service for

the machine till it reject.

Contact Me