0.3-2.0x1300 Slitting line

I.Main technical parameters
1.Coiler specification
Suitable material : common carbon steel, Aluminum coil
Material thickness: 0.2-2.0mm
Material width : 500mm -1300mm
Coiler inner diameter : ( input material) φ 460-φ520mm . after cover φ 608mm
( out material) φ 480-φ508mm
Coiler outer diameter : φ 1600mm
Capacity : Max: 10 T
Slitting speed: 0-120m/min

2.Strip
Recoil strip inner diameter: φ508
Strip coil outer diameter: φ1600
Width tolerance :±0.02mm (TAKE1.5mm thickness as standard)
Burr : Min 0.05mm ( 5% of material thickness)
Surface uniformity: ±2mm

3.Other parameters:
Power supply: 380V 50Hz3PH
Machine total power: about 500kw
Slitting way: drive
Recoil method: upper recoiler
Equipment installation requirement:±0.2mm (horizontal tolerance)
Slitting blade swing tolerance:±0.02mm (installed in the blade base)
Space for the line: (Length )18m * 7m (width)

II. Equipment composition
1.Coil car
2.Decoiler
3.Former loop bridge
4.Side guide wheel device
5.Round disc slitting machine
6.Scrap rewinder
7.Back loop bridge
8.Tension station
9.Recoiler
10.Unloading coil car
11.Hydraulic system
12.Pneumatic system
13.Others