N (c) - 6 Analyzer for Oil Testing
USD $14,446.23 - $14,446.23 /Piece
Min.Order:1 Piece
Xinxiang Dongfeng Filter Technology Co., Ltd.
N (c) - 6 Analyzer for Oil Testing
N(c)-6 Portable particle counter is researched adopting light-blocking method theory
(shading type), used in real-time monitoring for oil pollution particles of hydraulic system.
At the same time, because of its built-in the precision metering pump, which can realize
offline (bottle) test of low viscosity oil, and can be widely applied in aviation, aerospace,
electric power, petroleum, chemical industry, transportation, ports, metallurgy, machinery,
automobile manufacturing and so on, in these fields implement solid particles pollution testing
in the hydraulic oil, lubricating oil, transformer oil (insulating oil), turbine oil, gear oil, engine
oil,aviation kerosene, water-based hydraulic oil etc., and particle impurities detection in the
organic liquid and polymer solution.Traditional particle counters is easy to produce secondary
pollution after an external sampler, directly affects the accuracy of the test results, but n (c)-6
portable particle counter adopts imported sensor and power sources, which does not require
any external samplers, can be directly connected to the device and testing speed is very fast,
it only takes 2 minutes to complete the test. This device has high precision and repeatability.
Technical data
Light source: Semiconductor laser
Pressure: 0~0.6Mpa
Test range: 1μm~400μm
The temperature of tested sample:<50°C
Sensitivity: 1μm(ISO4402)or 4μm(C)
Test repeatability:<5% (count value)
(ISO11171:GB/T18854-2002)
Test accuracy: ±0.5 Pollution level
Measurement channel: Six arbitrary setting particles channels
Power: 24V,4A 5V,6A
Sampling rate: 20mL/min
Sampling accuracy: ±3%
Environmental temperature:10°C~40°C
Interface type: Stainless steel quick connector; inlet and outlet outer diameter φ 6, inner diameter φ 4 nylon hose assemblies
Apparatus volume:400(L)×350(W)×210(H)
1. Established in 1994 , about 21years experience .
2. Four series leading Products:
(a)Hydraulic system Cleaning&Filtration Device
(b)Complete Hydraulic Filters
(c)Hydraulic System Accessories
(d)Pump Valve Components..
3. Specialized research and development team .
4.Ninety-three thousand square meter(old plant and new plant).
5. Many stock filters .
6.The Testing Center of Xinxiang Filtration&Separation Industry Association
ISO 2941 Verification of collapse/burst resistance
ISO 2942 Verification of fabrication integrity and determination of the first bubble point
ISO 2943 Verification of material compatibility with fluids
ISO 3723 Method for end load testing
ISO 3724 Verification of flow fatigue characteristics
ISO 3968 Evaluation of pressure drop versus flow characteristics
ISO 16889 Multi-Pass method for evaluating filtration performance