Product Model: LD04-LD08

Installation and Usage

1. LD Series Cam Clutch is prelubricated with special grease and are ready for use.

No additional lubricant is required.

2. When installing the clutch on the shaft, press the clutch inner race slightly with a soft hammer to prevent the clutch

Outer race from slipping away from the inner race.

3. Be sure to attach the plate. This prevents the outer race from slipping away from the inner race. See recommended

Dimensions of the plate listed on the right.

4. For lubrication, coat the plate and thrust metal with grease.

5. Never apply thrust loads to the clutch. Other devices should be provided to take up thrust loads applied to the clutch.

6. Key should be in accordance with JIS B1301-1959.

7. The bores of the pulley, sprocket, etc., should have a tolerance of H6 or H7.