Name: BREU30-(K) C pre-greased one-way bearing with couplings
Brand: Suma
Availability: InStock

Product Details

Product Description

BREU30-(K) C pre-greased one-way bearing with couplings
Details of BREU30-(K) C
Model		BREU30-(K)C
Material		GCr15
Type		CAM
Inner Diameter		30mm
Outer Diameter		100mm
Weight		5.9kg
Lubricant		grease
Width		109.9mm
Key Way		8mm x3.3mm
Application		reducer,other industry machine

Main Technical Specifications

Dimensions(Dimensions in mm)

Model	BoreSize	Keyway	A	B	C	D	E	F	G	H	I	J	S	Weight
Model	H7	InnerRace			h7									kg
BREU30(K)-C	30	8 ×3.3	109.9	137	100	73	28	19.3	5.9	62.5	76	8.7	9.7	5.9
BREU35(K)-C	35	10×3.3	127.7	152	110	83	40	28.3	8.7	63.5	79	11.7	11.5	8.5
BREU40(K)-C	40	12 ×3.3	132.7	164	125	83	40	28.3	6.7	68.5	86	11.7	11.5	10.5
BREU45(K)-C	45	14 ×3.8	132.7	176	130	83	40	28.3	6.7	68.5	86	11.7	11.5	11.2
BREU50(K)-C	50	14 ×3.8	142.2	200	150	83	40	28.3	8.2	78	94	11.7	11.5	15.6
BREU55(K)-C	55	16 ×4.3	159.8	219	160	107	45	30.4	10.8	84	104	14.6	15.2	21.8
BREU60(K)-C	60	18 ×4.4	176.8	235	170	107	45	30.4	11.8	101	120	14.6	15.2	26.4
BREU70(K)-C	70	20 ×4.9	189.3	251	190	107	45	30.4	10.3	113.5	134	14.6	15.2	33
BREU80(K)-C	80	22 ×5.4	196.8	267	210	107	45	30.4	7.8	121	144	14.6	15.2	41

Lubrication

BREU series Cam Clutches need periodic maintenance and lubrication to both bearing to provide maximum performance throughout their service life. Lack of prescribed maintenance and lubrication will shorten the Service life of Cam Clutch and may cause unnecessary mechanical damage.

Maintenance
1. Remove the set screw at the flange, torque arm or cover.
2. Inject equal amounts of grease into the bearing from the grease nipple. Refer to the grease volume table for the correct amount.
3. Run the Cam Clutch disengaged for from 20 to 30 minutes with the set screw removed. Excess of grease in the clutch area will flow out of the tapped holes. Be careful to avoid over greasing. Too much grease in the
clutch will cause it to run hot, interfere with the clutch action, and may lead to mechanical damage.
4. Wipe off excess of grease and re-install the set screw.