Specifications

cooper bush/brass bushing/oilless bearing
it can be widely used in the light load

cooper bush/brass bushing/oilless bearing

  The base  sintered parts such as sliding bearings or other formed parts are iron, bronze, iron with bronze and       other metal in powder form. This powder is formed under high pressure in dies into a temperature, which is just below the melting point. According to the work condition, the bearings can impregnate with different oil or solid lubricants for the self-lubricating. Sintered self-lubricating bearings are the ideal and economical solution for applications where lubrication is difficult or lubrication could not be applied.

 

Features

• 1. Good wear resistance with lower friction
• 2. Lower maintenance requirement
• 3. Lower the material cost for large production
• 4. High speed with lower noise
• 5. Can be machined again after installation if possible
• 6. Different structures could be available against special request

Tolerance 

• Inside diameter ID: F7
• Outside Diameter OD: r7
• Flange Diameter: js13
• Flange thickness: js13
• Length: js13

Specifications

 Production flow

Types of FR bearing

 

 

 

• Factory informtion

Admin Office

workshops

Inspection

• We are supplying full lines of slide bushings:

 

SF-1(du) oilless bearing bushing (PTFE Composite)

SF-2(dx) slide bearing bushing (POM Composite)

FB090(FB090G) bronze bushing

FB092 bronze bushing

JDB,JFB solid graphite lubricating bushing

JF bi-metal bushing

FU sintered bronze or iron bushing

FZ POM/Al/Cu ball cage retainer

 

• ISO/TS16949 certification