Introduction 

Briquetting is the transformation of powdery or granular raw materials into a larger more convenient size with different shapes. This is accomplished by compacting the raw materials with the rollers pressing.

During briquetting, the raw materials should be added the binder for good forming effect.The briquette machine is widely used for recycling these materials with high economic profits.

The briquettes can be produced with high or low pressure and can undergo mechanical or thermal treatment according to the characteristics of the processed material, the binder used and the desired end product.

Features

1.The roller is made by hard materials with good wear resistance and long life time.
2.The service life of wearing parts is up to 4000 hours.

3.The machines electricity coal reduce by 60%.

4.The machine is easy to operate and maintain.

5.The molding materials are energy saving, easy to tansport and higher utilization of waste.

6.The final products are smokeless, non-toxic, none peculiar and environmental protection.

Process of production

1. If your raw material is big block, you should choose a crusher.

2. If your raw material is with high moisture (higher than 12%), you should choose a dryer. If you prefer to use dry powder type briquette machine, the moisture should be less than 5%, also based on materials’ performance.

3. Generally, it is better to add some binder/adhesive into the raw material. If you prefer to use dry powder type briquette machines, generally, no need binder.

4. About belt conveyor, you can buy from us, also can make by yourself. We would like to supply the detail drawing of conveyor for you.

5. The final briquettes can be dried under the sun or through mesh belt dryer and chain plate dryer.

Parameter

Picture Showcase